How do I turn on

[skysmad]

I've tried the metal trick where I turn it on my using a piece of metal but it won't the green led shows that everything's fine but even siding the way I did before to turn it on it won't work which was take the power cord thingy out the old case and reconnect it

Anyone know what to do ?

The picture might not be right as I'm on my iPad

[Jaybird]

u wut m8? your english is a bit jumpy

[Guest]

He's trying to power on his board by jumping the pins.

 

u wut m8? your english is a bit jumpy

 

Haha.... jumpy... jumping.... get it

[EmotionalSloth]

He's trying to power on his board by jumping the pins.

 

 

Haha.... jumpy... jumping.... get it

why am I so in love with your profile pic....

[Ssoele]

You have to bridge these 2 pins

 

[skysmad]

u wut m8? your english is a bit jumpy

I appreciate the laugh bit stressed and I needed it but anyway I really need my PC working so if you know can you please

[Jaybird]

He's trying to power on his board by jumping the pins.

 

 

Haha.... jumpy... jumping.... get it

pun intended

 

thoughts what i thought but I want to be sure that was the only thing he was getting at. 

[skysmad]

You have to bridge these 2 pins

 

What would happen if I said nothing happened

[Jaybird]

What would happen if I said nothing happened

check your cables and make sure you psu is plugged in and turned on. alot of people forget to turn the psu on. 

[Ssoele]

What would happen if I said nothing happened

 

With what are you trying to bridge it? Try a bare-metal screwdriver.

[Jaybird]

I had my rig on a test bench saturday so I had to bridge the connection. i just used a screw driver. 

[Fred Castellum]

I had my rig on a test bench saturday so I had to bridge the connection. i just used a screw driver. 

Ghetto fix

[skysmad]

With what are you trying to bridge it? Try a bare-metal screwdriver.

overused a screwdriver and a key and a badge and lots of other metal things it won't turn on but the tree led shows everything is working and fine

[Jaybird]

overused a screwdriver and a key and a badge and lots of other metal things it won't turn on but the tree led shows everything is working and fine

I would double check you are bridging the right pins. check the cables to see if they are plugged in properly. 

[ViruZ_HUN]

When i read the title i was like this?

 

"Do this guy wan't to show how he turns on his sexuall intresst?"

[Jaybird]

Ghetto fix

It was super ghetto

[Fred Castellum]

It was super ghetto

Set up like a bosssssss

[skysmad]

When i read the title i was like this?

 

"Do this guy wan't to show how he turns on his sexuall intresst?"

no how ever less stressful that would be no that's not what I meant

[skysmad]

I would double check you are bridging the right pins. check the cables to see if they are plugged in properly.

Everything is plugged in properly but I don't know what happened it just won't start though everything works

[Jaybird]

I think i got it. my board wouldnt allow me to boot with out the screws being in place. I notice in your pic there is not a screw in the hole. also what are you using at your test bench? you could be shorting out the entire board. 

[skysmad]

I think i got it. my board wouldnt allow me to boot with out the screws being in place. I notice in your pic there is not a screw in the hole. also what are you using at your test bench? you could be shorting out the entire board.

Ehhh.....metal under mono idk

[skysmad]

Mobo ehh hill look and I'll put the screw back

[Jaybird]

Ehhh.....metal under mono idk

they dont need to be screwed in. just making contact with the metal bits around the hole. 

[skysmad]

Mobo ehh hill look and I'll put the screw back

Actually I wouldn't need to cause it's been working like this for months

[skysmad]

they dont need to be screwed in. just making contact with the metal bits around the hole.

nope didn't work