I want to watercool my pc

[AcidzDesigns]

Ok, so i want to watercool my pc, i have a H100 but i want to do a custom loop, i have a NZXT Phantom 530 in white. I want to have the piping clear and with a white fluid in the loop, any recommendations of parts to get

 

Case Specs

Cooling

• Front: 2x140mm/ 120mm or 1x200mm, (1 x 200mm included)
• Rear: 1x140mm (included) / 120mm
• Bottom: 2x120mm
• Side: 1x140mm
• Top: 2x200mm/ 140mm or 3x120mm
• Interior: 1x120mm/140mm

 

Rig specs

CPU- AMD FX-6100 3.3GHz, OC'd to 4.0GHz

MOBO- MSI 970A-G46

RAM- Kingston HyperX Blue 8GB 1600MHz

GPU- MSI R9 270x

HDD- WD Black 1TB

PSU- 550w

CASE- NZXT Phantom 530

COOLER- Corsair H100 Liquid Cooler

[Izaya Orihara]

Not woth it. You would spend 500 to 600$ at least for a decent GPU+ CPU setup and unless you have some really highend hardware that's not worth it. 

[AcidzDesigns]

i was thinking about saving and getting a i5 4770k and a 760 or 770 GPU 

[NInety]

For those parts, you might just want to keep the H100i and get this for the GPU:

 

 

(Kraken G10)

[LEGEND]

First step would be to look at build logs including your case. Then you'll be able to see what rads you can fit and where to fit your rez and pump. Read the newbie thread, to get an idea of what you need.

[AcidzDesigns]

i can put a triple 140 on the top single 140 on the back and a dual 120 on the front, tons of room in the case

[TheDigitalRealm]

Not woth it. You would spend 500 to 600$ at least for a decent GPU+ CPU setup and unless you have some really highend hardware that's not worth it. 

 

Ditto. you probably wouldn't get it any quieter.