Jump to content

Hey guys and gals,

 

I have successfully made a custom GPU BIOS and i have been testing a new BIOS for the past four months now and i have the GPU core at 1267Mhz and RAM at 7008MHz. I can go higher but the stock cooler can't cool the heat quiet good enough so i want to change the stock air cooler for this one from Arctic....http://www.amazon.com/dp/B00HHMJIIO/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=419CPRZ90JL7&coliid=I35BIF8XTULWGL&psc=1

 

I have a Galaxy 660Ti GC 3bg version which is this.....http://www.galaxytechus.com/__US__/Product6/ProductDetail?proID=8&isStop=0 and i was wondering if any of you have/had the same GPU and installed the Arctic Extreme IV on it?

 

I have see reviews where people have installed it on 670s 770s and even 290Xs. My PCB looks like the picture below but the layout looks differently. I contacted the company and this was their reply......

 

Thank you for your interest in our product.

 

Accelero Xtreme IV is compatible only with the graphics card using a standard size PCB with a width of 98mm. 

post-3854-0-66243100-1401070501.jpg

 

Graphics cards with different dimensions will not be compatible with this cooler. This includes: 
-Low profile Graphics card 
-Graphics cards with extended PCB (such as : ASUS DirectCU II R9 290, GTX780-DC2OC-3GD5) 

 

Please check with the height restriction drawing of the cooler to see if it fits your card and case.

A water-cooled mid-tier gaming PC.

Link to comment
https://linustechtips.com/topic/157257-after-marker-gpu-air-cooler/
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×