Jump to content

XMP-3596 CL19 RAM on Ryzen 5000?

milesuy
 Share
Go to solution Solved by RONOTHAN##,
57 minutes ago, milesuy said:

would the RAM work with the CPU at its rated speed (or other Ryzen 5000 series CPUs)?

Yeah, it'll work. The only thing that might happen is depending on your specific motherboard's auto rules, set the CAS latency to 20 instead of 19 because AMD setups generally don't like odd CAS latency values for reasons I won't get into. 

Posted

I'm planning to build a PC with Ryzen 5000 series CPU with a XMP-3596 CL19 RAM.

I might go for a Ryzen 5 5600, but would the RAM work with the CPU at its rated speed (or other Ryzen 5000 series CPUs)? If not, can it run at least 3200 CL16?

The RAM kit is a 2x16GB TeamGroup Vulcan TUF Gaming Alliance <-- links to TeamGroup's website.

image.png.8b8598e83f33eea140983d658db3fe67.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Weird that the XMP profile is 2 MHz off of DDR4-3600 (1800 MHz).

If you have a decent motherboard, DDR4-3600 (or 3596 in your case) should be possible - no need to drop it down to a lower frequency.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K @ 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yes, should be possible. I've got an R9 5900X with DDR4 running at 3600 MT/s, CL16.

Remember to either quote or @mention others, so they are notified of your reply

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, -rascal- said:

Weird that the XMP profile is 2 MHz off of DDR4-3600 (1800 MHz).

If you have a decent motherboard, DDR4-3600 (or 3596 in your case) should be possible - no need to drop it down to a lower frequency.

I am planning to get a A520M or B450M motherboard, probably from Gigabyte's DS3H line, would these motherboards/chipsets be an issue?

Would the motherboard automatically recognize 3596 or 3600?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
20 minutes ago, milesuy said:

I am planning to get a A520M or B450M motherboard, probably from Gigabyte's DS3H line, would these motherboards/chipsets be an issue?

Would the motherboard automatically recognize 3596 or 3600?

It's the CPU's integrated memory controller that needs to recognize it, the board just provides the physical connection between RAM and CPU. Anything above 2666 MT/s generally requires XMP to be enabled in the BIOS.

 

https://www.gigabyte.com/Motherboard/B450M-DS3H-rev-1x/sp#sp

According to their specs, they support 3600 MT/s

Remember to either quote or @mention others, so they are notified of your reply

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
57 minutes ago, milesuy said:

would the RAM work with the CPU at its rated speed (or other Ryzen 5000 series CPUs)?

Yeah, it'll work. The only thing that might happen is depending on your specific motherboard's auto rules, set the CAS latency to 20 instead of 19 because AMD setups generally don't like odd CAS latency values for reasons I won't get into. 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×