I need some help please

[Dioxazine]

So i have some problems i font know if this is correct:

 

So i put these ^ in theire things but i got a “ •led “ connector (that is its name litteraly) witch i dont know where i should put and 

Well i put it in the last connector standing up on the last PIN not pins the one with only 1 

As you can see its standing up not on the side cuz there were no more conectors so its connected to the one with only 1 

(its from the case fans that it came with so idk )

[Levent]

You plugged them wrong. Although layout can be different, its never top and bottom combination for positive and negative. Check your motherboards user manual for proper pinout.

[WackySpace]

It's better to check the motherboard manual, it highlights exactly where each case pin should go, either in the paper manual if it came with or on the manufactures website. 

[Dioxazine]

20 hours ago, Levent said:

You plugged them wrong. Although layout can be different, its never top and bottom combination for positive and negative. Check your motherboards user manual for proper pinout.

No so i oit them 1-3 2-4 5-7 and 6-8 but the 9-blank i put the last one the •led one on the 9-blank standing up the rest are fine 

[Dioxazine]

so can i plug a •led to the 9-10 one? 
my case came with one more header which is a “ •led “ header and i dont know if i can plug it in the 9-10 cuz the others are occupied by the obviously hard drive led reset and power ones but the 9-10 is empty and i dont know if i have to plug the •led there 

[Poinkachu]

14 minutes ago, Dioxazine said:

so can i plug a •led to the 9-10 one? 
my case came with one more header which is a “ •led “ header and i dont know if i can plug it in the 9-10 cuz the others are occupied by the obviously hard drive led reset and power ones but the 9-10 is empty and i dont know if i have to plug the •led there 

I'm gonna say no.

if by 10 you mean the section marked "No Connection" chances are there are no pin there. And LEDs needs both +V and GND

 

If you are confused, refer to the PC case manual. Or share what brand & model your PC case is so we can try help you figure it out

Chances are it's either :

1. a cable supposed to go to something like a RGB hub so that you have the ability to switch colors of LED connected to the hub using a button on the PC case.

2. A cable to light up some LEDs built into the PC case, which usually still isn't supposed to be plugged into front panel header. At the very least not unless you really know what you're doin.

[Dioxazine]

21 minutes ago, Poinkachu said:

I'm gonna say no.

if by 10 you mean the section marked "No Connection" chances are there are no pin there. And LEDs needs both +V and GND

 

If you are confused, refer to the PC case manual. Or share what brand & model your PC case is so we can try help you figure it out

Chances are it's either :

1. a cable supposed to go to something like a RGB hub so that you have the ability to switch colors of LED connected to the hub using a button on the PC case.

2. A cable to light up some LEDs built into the PC case, which usually still isn't supposed to be plugged into front panel header. At the very least not unless you really know what you're doin.

So the case i have is a 1stplayer gaming x3-m rgb mid tower 

and motherboard is a msi b450a-m pro max 

and ye si was speaking about the 9-no connection one because the rest are occupied by the hard redet etc and the led ones the smallest ones the led+ and led- are in theire places i have one more called •led with the dot thing it came from the case and yes the case has a led button 

and on the 10 one the no connection theres no pin 

[Poinkachu]

6 minutes ago, Dioxazine said:

So the case i have is a 1stplayer gaming x3-m rgb mid tower 

and motherboard is a msi b450a-m pro max 

and ye si was speaking about the 9-no connection one because the rest are occupied by the hard redet etc and the led ones the smallest ones the led+ and led- are in theire places i have one more called •led with the dot thing it came from the case and yes the case has a led button 

and on the 10 one the no connection theres no pin 

I'm guessing the pc case came with either no manual or a very shitty manual.

 

Can you take a picture of the so called led connector ?

Most likely it is supposed to go to an RGB hub that is usually included with pc case that comes with led button.

[Dioxazine]

12 minutes ago, Poinkachu said:

I'm guessing the pc case came with either no manual or a very shitty manual.

 

Can you take a picture of the so called led connector ?

Most likely it is supposed to go to an RGB hub that is usually included with pc case that comes with led button.

this is the •led one

the motherboard manuel does not have anything other than the other headers the one called •led doesnt show in the manual of the case neither the motherboard so i have to guess or ask

[Poinkachu]

11 minutes ago, Dioxazine said:

this is the •led one

the motherboard manuel does not have anything other than the other headers the one called •led doesnt show in the manual of the case neither the motherboard so i have to guess or ask

Did your pc case came with a fan / rgb hub installed ?

If so, take a pic

 

And yes, I'm quite sure that connector isn't supposed to go there.

There's 2 wires coming out from that connector, so most likely it needs 2 pins. What kinda pins, i don't know yet.

[Robchil]

2 hours ago, Dioxazine said:

No so i oit them 1-3 2-4 5-7 and 6-8 but the 9-blank i put the last one the •led one on the 9-blank standing up the rest are fine 

you mean the secondary power LED? it's usually on the bottom row but with a pin spacing between the two pins. .. the top row should have speaker on 4 pins. 

 

older and other boards have a larger frontpanel connector cluster.. with the speaker and secondary power led..  i see your board only have the speaker above the cropped version.  the split powerLED connectors are so you can use both.. 

 

so. you don't have the pins i would assume. and just leave it alone.  you can use either the double LED plug or the split LED plug. 

 

what mainboard do you have? 

 

 

[minibois]

-- Threads merged --

Please don't repost threads with the same question/topic

[Dioxazine]

4 hours ago, Poinkachu said:

Did your pc case came with a fan / rgb hub installed ?

If so, take a pic

 

And yes, I'm quite sure that connector isn't supposed to go there.

There's 2 wires coming out from that connector, so most likely it needs 2 pins. What kinda pins, i don't know yet.

When i come home hang on if you have discord can you send it so its easier?

[Dioxazine]

On 10/22/2023 at 3:26 PM, Dioxazine said:

So i have some problems i font know if this is correct:

 

So i put these ^ in theire things but i got a “ •led “ connector (that is its name litteraly) witch i dont know where i should put and 

Well i put it in the last connector standing up on the last PIN not pins the one with only 1 

As you can see its standing up not on the side cuz there were no more conectors so its connected to the one with only 1 

(its from the case fans that it came with so idk )

Ok so the motherboard manual doesnt say anything about this special •led one from the case it only says about the normal 1 headers of led + and - this one is just there i have nowhere to plug it only on the 9th or the no connector thing one the last one in second photo and its a •led not a simple led one its from the case

[Robchil]

2 hours ago, Dioxazine said:

Ok so the motherboard manual doesnt say anything about this special •led one from the case it only says about the normal 1 headers of led + and - this one is just there i have nowhere to plug it only on the 9th or the no connector thing one the last one in second photo and its a •led not a simple led one its from the case

no.. you just simply tuck it away somewhere out of sight and don't use it on that mainboard.