Jump to content

Do custom air coolers exist for the 6900 XT?

Fendrick
By Fendrick
in Cooling
 Share
Posted

Don't think there's any custom aircoolers, but there's certainly blocks and stuff for watercooling

 

System : AMD R9 5900X / Gigabyte X570 AORUS PRO/ 2x16GB Corsair Vengeance 3600CL18 / ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Eisbaer 280mm AIO (with 2xArctic P14 fans) / 2TB Crucial T500  NVme + 2TB WD SN850 NVme + 4TB Toshiba X300 HDD drives/ Corsair RM850x PSU/  Alienware AW3420DW 34" 120Hz 3440x1440p monitor / Logitech G915TKL keyboard (wireless) / Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

There can be but they usually end up worse due to cooling issues with vrms as those normally arent covered.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

its christmas treat yourself to a block and the rest. Guaranteed happiness. 

i7 12700k @ 5.1GHz OC (EKWB) / Msi Edge wifi ddr4 / Asus TUF 3080ti (EKWB) / Acer XB327 270HZ, 3x LG 27GL83A-B 144hz, SONY KDL40D3000 / Thermaltake P5 / 32gb Corsair Dominator Platinum 3600 / Samsung 980 pro 1tb NVMe ssd, Serbrent 1tb NVMe ssd,Samsung 850 EVO 500GB, Samsung 860 PRO SSD (raid), 2 TB Seagate HDD / Seasonic TX 1000w titanium/ EK-FC1080 Ti GTX ASUS Strix RGB GPU Block, EK-Supremacy EVO, EK-CoolStream XE 360 [6x120 Thermaltake Ring fans], EK-CoolStream XE 360 slim [6x120 Thermaltake Ring fans],  EK-DDC 3.2 PWM Elite Edition, EK-RES X3 250 RGB/ Mountain Everest custom with Sorbothane sound dampening / Razer Viper Ultimate, Logitec G502 , Logitec G Pro Wireless / Beardynamic DT1990 PRO with Litz wire full conversion to balanced, custom cable in Litz, Dakoni ear pads going through Topping E30 DAC to Singxer SA-1 amp/Sennhieser HD598, Sennhieser GSP 670, Custom Floor Standing Speakers in 5.1, Panasonic amp. Rode NT-USB on Rode boom.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Fendrick

 

No need for custom air nor custom water. Just a de-shroud works wonders in most cases. And your card is a great baseline.

 

Just remove the plastic shroud, stock fans, and zip-tie standard size fans that fit nearest to the size of the metal heatsink of the card (3x92mm fans or 2x120mm fans). And get a fan power cable splitter and connect them to the motherboard. Or get a fan hub.

 

6yc7r93nzmo81.jpg?width=640&crop=smart&a

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×