Jump to content

Curious what people think (Possibly dying 3080 Ti)

Last night, about 15 minutes after I turning on my PC, I noticed around 10 small blocks appear on my screen, I was only browser the web while having a few programs open. These blocks reminded me of dying VRAM. There were only about 10-ish of them and very small (forgot to take a picture). 

By default, I have a undervolt profile loaded with Windows, around 850mV (can't remember exact, at work, can't check atm) on the core, at 1930MHz with a +500 on the memory. I set my 3080 Ti back to stock and the small blocks disappeared. I then tried to start FH5 as a test, because it is very GPU intensive, but FH5 crashed while loading. 

I then at this point obviously thought one of my VRAM chips was dead, since loading them up with a game causes said game to crash... 

I then went for a reboot with stock GPU settings, and after reboot there were no blocks on the screen. I tried starting FH5 and it started perfectly. After driving around ingame with no issues, I started enabling my MSI Afterburner profiles. First I enabled the undervolt which I mentioned in the start of the post and this worked perfectly. And then I enabled the profile with my maximum possible OC (stable OC), with +75 on the core which results in 2130MHz on the core, with +500 on the memory aswell. Card pulls 430 watt using this profile. No issues at all. 

But now I'm obviously thinking about this. Was this just a hardcore, weird graphics bug, or is my graphics card starting to die? Was it the start of the end I just saw happening? 😛

I still have 2 years of warranty on the 3080 Ti. If this happens again, I will start RMA case ASAP, and yes I will remember to take a photo for the RMA case. 

But, any thoughts?

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

23 minutes ago, BetteBalterZen said:

Last night, about 15 minutes after I turning on my PC, I noticed around 10 small blocks appear on my screen, I was only browser the web while having a few programs open. These blocks reminded me of dying VRAM. There were only about 10-ish of them and very small (forgot to take a picture). 

By default, I have a undervolt profile loaded with Windows, around 850mV (can't remember exact, at work, can't check atm) on the core, at 1930MHz with a +500 on the memory. I set my 3080 Ti back to stock and the small blocks disappeared. I then tried to start FH5 as a test, because it is very GPU intensive, but FH5 crashed while loading. 

I then at this point obviously thought one of my VRAM chips was dead, since loading them up with a game causes said game to crash... 

I then went for a reboot with stock GPU settings, and after reboot there were no blocks on the screen. I tried starting FH5 and it started perfectly. After driving around ingame with no issues, I started enabling my MSI Afterburner profiles. First I enabled the undervolt which I mentioned in the start of the post and this worked perfectly. And then I enabled the profile with my maximum possible OC (stable OC), with +75 on the core which results in 2130MHz on the core, with +500 on the memory aswell. Card pulls 430 watt using this profile. No issues at all. 

But now I'm obviously thinking about this. Was this just a hardcore, weird graphics bug, or is my graphics card starting to die? Was it the start of the end I just saw happening? 😛

I still have 2 years of warranty on the 3080 Ti. If this happens again, I will start RMA case ASAP, and yes I will remember to take a photo for the RMA case. 

But, any thoughts?

My thoughts, card was never 100% stable and something triggered it. After you loaded the stock profile, the driver was still affected by this, until you rebooted the machine. I have experienced similar behavior with a handful of overclocked cards. I never bother to oc my GPU anymore because no matter how stable it gets, it dosen't seem to hold up when the profile is not flashed directly to the card. Back in the old days 600 series and earlier, you could just flash the OC profile and everything was fine.

No need to RMA. I would simply, if you still want to run the OC, just bump up the voltage slightly and call it a day. Most likely just memory not being stable at +500 at that voltage.

CPU: i7 9700K@5ghz all core (silence + summer)

cache x47, AVX offset 0

Motherboard: Asus Maximus XI Hero

RAM: Patriot Viper Steel 2x8gb@3733mhz @jedec cl15

PSU: EVGA SuperNova 750 G3

Mon:  LG 27GL850-B, 144Hz Nano IPS - G-Sync compatible/Freesync

GPU: EVGA 1080ti SC Black Edition w/ G12 bracket

Sound: Odac + Fiio E09K

Case: Fractal Design R6 TG Blackout

Storage: MP510 960gb and 860 Evo 500gb

Cooling: CPU: Kraken X62 - GPU: Kraken X42(RIP) -> X53 (From RMA)

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, DoctorNick said:

My thoughts, card was never 100% stable and something triggered it. After you loaded the stock profile, the driver was still affected by this, until you rebooted the machine. I have experienced similar behavior with a handful of overclocked cards. I never bother to oc my GPU anymore because no matter how stable it gets, it dosen't seem to hold up when the profile is not flashed directly to the card. Back in the old days 600 series and earlier, you could just flash the OC profile and everything was fine.

No need to RMA. I would simply, if you still want to run the OC, just bump up the voltage slightly and call it a day. Most likely just memory not being stable at +500 at that voltage.

I love your respons and I seriously hope you are correct! 🙂

I will go home and bump up the voltage a tat more and see how things go. 

Thank you for the reply. 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, BetteBalterZen said:

I love your respons and I seriously hope you are correct! 🙂

I will go home and bump up the voltage a tat more and see how things go. 

Thank you for the reply. 

 Forgot you where in Denmark. Its hot atm, thats why. You generally need more voltage when ambient temps are higher to keep everything stable. Unless you see the green squares at stock settings don't worry, everything is fine.

CPU: i7 9700K@5ghz all core (silence + summer)

cache x47, AVX offset 0

Motherboard: Asus Maximus XI Hero

RAM: Patriot Viper Steel 2x8gb@3733mhz @jedec cl15

PSU: EVGA SuperNova 750 G3

Mon:  LG 27GL850-B, 144Hz Nano IPS - G-Sync compatible/Freesync

GPU: EVGA 1080ti SC Black Edition w/ G12 bracket

Sound: Odac + Fiio E09K

Case: Fractal Design R6 TG Blackout

Storage: MP510 960gb and 860 Evo 500gb

Cooling: CPU: Kraken X62 - GPU: Kraken X42(RIP) -> X53 (From RMA)

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, DoctorNick said:

 Forgot you where in Denmark. Its hot atm, thats why. You generally need more voltage when ambient temps are higher to keep everything stable. Unless you see the green squares at stock settings don't worry, everything is fine.

Roger that, and yup - it's hotter than normal here these days. 

Thanks again 🙂

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

if it's just on the oc, no need to rma, it's just...vram being vram.

 

I had a space invader card, underclocked the memory by 500 below stock and used it for years til the fan died. I don't minmax vram oc anymore, i just match the clocks to the oc'd models and it usually works.

 

Whether or not i should have RMA'd is another issue though

5950x 1.33v 5.05 4.5 88C 195w ll R20 12k ll drp4 ll x570 dark hero ll gskill 4x8gb 3666 14-14-14-32-320-24-2T (zen trfc)  1.45v 45C 1.15v soc ll 6950xt gaming x trio 325w 60C ll samsung 970 500gb nvme os ll sandisk 4tb ssd ll 6x nf12/14 ippc fans ll tt gt10 case ll evga g2 1300w ll w10 pro ll 34GN850B ll AW3423DW

 

9900k 1.36v 5.1avx 4.9ring 85C 195w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5500 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-30-280-20 ddr3666bdie 1.45v 45C 1.22sa/1.18 io  ll EVGA 30 non90 tie ftw3 1920//10000 0.85v 300w 71C ll  6x nf14 ippc 2000rpm ll 500gb nvme 970 evo ll l sandisk 4tb sata ssd +4tb exssd backup ll 2x 500gb samsung 970 evo raid 0 llCorsair graphite 780T ll EVGA P2 1200w ll w10p ll NEC PA241w ll pa32ucg-k

 

prebuilt 5800 stock ll 2x8gb ddr4 cl17 3466 ll oem 3080 0.85v 1890//10000 290w 74C ll 27gl850b ll pa272w ll w11

 

Link to comment
Share on other sites

Link to post
Share on other sites

12 minutes ago, xg32 said:

if it's just on the oc, no need to rma, it's just...vram being vram.

 

I had a space invader card, underclocked the memory by 500 below stock and used it for years til the fan died. I don't minmax vram oc anymore, i just match the clocks to the oc'd models and it usually works.

 

Whether or not i should have RMA'd is another issue though

Roger that, awesome to hear your opinion as well! 

What exact card did you have? 🙂

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

42 minutes ago, BetteBalterZen said:

Roger that, awesome to hear your opinion as well! 

What exact card did you have? 🙂

my 970, kept a mem oc, stable for awhile, then artifacts appeared even at stock, underclocked the ram and didnt have a problem for years til fans gave out

5950x 1.33v 5.05 4.5 88C 195w ll R20 12k ll drp4 ll x570 dark hero ll gskill 4x8gb 3666 14-14-14-32-320-24-2T (zen trfc)  1.45v 45C 1.15v soc ll 6950xt gaming x trio 325w 60C ll samsung 970 500gb nvme os ll sandisk 4tb ssd ll 6x nf12/14 ippc fans ll tt gt10 case ll evga g2 1300w ll w10 pro ll 34GN850B ll AW3423DW

 

9900k 1.36v 5.1avx 4.9ring 85C 195w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5500 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-30-280-20 ddr3666bdie 1.45v 45C 1.22sa/1.18 io  ll EVGA 30 non90 tie ftw3 1920//10000 0.85v 300w 71C ll  6x nf14 ippc 2000rpm ll 500gb nvme 970 evo ll l sandisk 4tb sata ssd +4tb exssd backup ll 2x 500gb samsung 970 evo raid 0 llCorsair graphite 780T ll EVGA P2 1200w ll w10p ll NEC PA241w ll pa32ucg-k

 

prebuilt 5800 stock ll 2x8gb ddr4 cl17 3466 ll oem 3080 0.85v 1890//10000 290w 74C ll 27gl850b ll pa272w ll w11

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, xg32 said:

my 970, kept a mem oc, stable for awhile, then artifacts appeared even at stock, underclocked the ram and didnt have a problem for years til fans gave out

Damn, so the OC actaully may have harmed the VRAM? Kinda crazy but also so cool how you kept it alive 😄

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...

Update: 

Last night it happened again, right after booting up loading Windows and a couple of programs. And this was with no memory overclock applied. I did however still run with the undervolt (1930MHz@875mV). After a reboot, all went away again. Now I have increased voltage with 10/15mV, will see how this goes. Might have flown too close to the sun with 875mV. My PC actually also BSOD'd with a Video Scheduler Internal Error but I managed to get a photo of the squares I mentioned just before the BSOD. 

Not expecting anyone to reply to this, just simply updating my thread here. More information is good information. Some might be in a similar situation in the future. 

IMG_20220831_171622.jpg

IMG_20220831_171651.jpg

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, Xkillerpn said:

RMA that card. just dont wait. it will get worst 

Yeah I have this feeling too... 

I will ask Komplett what they can do for me. I still have 2.5 years of warranty. 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

19 minutes ago, BetteBalterZen said:

Yeah I have this feeling too... 

I will ask Komplett what they can do for me. I still have 2.5 years of warranty. 

this could be do to excessive undershoot in voltage regulation have u capped the fps in nvidia control panel to ur monitors refresh rate

Link to comment
Share on other sites

Link to post
Share on other sites

21 minutes ago, BetteBalterZen said:

Yeah I have this feeling too... 

I will ask Komplett what they can do for me. I still have 2.5 years of warranty. 

and also is this happening after or before the msi AB profile loads?

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, clutchmaster said:

this could be do to excessive undershoot in voltage regulation have u capped the fps in nvidia control panel to ur monitors refresh rate

Actually, I have always run with 120FPS cap because my main monitor is 120Hz but I just got a 240Hz and because of that I sat the cap to 240FPS. And it is after this it started happening. 

I am in talk with Komplett now and I will see what they can do. If they're able to switch it out with a 3090 Ti possibly because my GPU was bought back when prices were insane, I'd happily do the RMA lol 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, clutchmaster said:

and also is this happening after or before the msi AB profile loads?

After hehe

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, clutchmaster said:

this could be do to excessive undershoot in voltage regulation have u capped the fps in nvidia control panel to ur monitors refresh rate

 

1 minute ago, BetteBalterZen said:

Actually, I have always run with 120FPS cap because my main monitor is 120Hz but I just got a 240Hz and because of that I sat the cap to 240FPS. And it is after this it started happening. 

I am in talk with Komplett now and I will see what they can do. If they're able to switch it out with a 3090 Ti possibly because my GPU was bought back when prices were insane, I'd happily do the RMA lol 

yep thats voltage sag but those artifacts should fix themselves in the next frame refresh if not then either theres a hardware issue or the driver glitched out or not enough voltage while under load
if it happens again while @0.950v then possibly a hardware fault is the issue

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, clutchmaster said:

 

yep thats voltage sag but those artifacts should fix themselves in the next frame refresh if not then either theres a hardware issue or the driver glitched out or not enough voltage while under load
if it happens again while @0.950v then possibly a hardware fault is the issue

Thank you clutchmaster, this is good info. 

As said though, currently waiting for Kompletts response. If they are willing to upgrade me to a 3090 Ti, I'll happily do it hehe. 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

Right so Komplett did say they would replace my card if they were able to recreate the errors seen in my photos but they most likely will not see those because it is kinda a periodic error, or may be cause of the undervolt. They will not just sent a replacement card upfront, which make total sense of course. So we agreed that if things got worse and became a permanent thing, like, booting up Windows without MSI Afterburner and there's artifacts all over, then we will do a replacement upfront. 

@clutchmasterI hope what you said is what is causing it. Currently running with a tat more voltage than before. If artifacts comes back, I will revert back to default voltage and see how that goes. 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...

Update: 

After increasing undervolt voltage with about 10mV, I have not since last comments experienced the same problem.

I most likely just did fly too close too the sun. 

Not expecting anyone to reply to this, just simply giving an update, in hopes of this may be a fix for someone in the future. I'm gonna give it a few weeks before marking @clutchmaster comment as the solution but it most likely is the solution. 

There's no place like 127.0.0.1 💙

 

Expand for setup details:

 

MOBO: ASUS ROG STRIX Z370-F Gaming  

CPU: Intel Core i7-8700K@4.7GHz, -0.095mV (Custom CNP-IHS + LM) 

CPU COOLER: CORSAIR Hydro Series H100x + 2x CORSAIR 120LL RGB

GPU: ASUS ROG STRIX RTX 3080 Ti OC LC@1950MHz (300W optimized undervolt profile)

RAM: G.SKILL TridentZ RGB 4x8GB@3700MT/s, 16-16-16-36, 1.35V (XMP Profile + 100MHz)

PCIe USB-A BOARD: ST Lab PCI-e 3.0 USB 3.1 (4x USB-A ports)

NVMe SSD: Samsung 970 EVO Plus 1TB 

#1 SATA SSD: Crucial MX500 2TB (1.05TB Partition RAID 0 striped with #2 SATA SSD: MX300)

#2 SATA SSD: Crucial MX300 1.05TB (RAID 0 striped with 1.05TB Partition on #1 SATA SSD: MX500)

PSU: CORSAIR HXi Series HX1200i (1200 Watt 80-PLUS Platinum)

CASE: CORSAIR iCUE 7000X RGB TG

CASE FANS: 4x CORSAIR SP140 RGElite, 2x CORSAIR 120LL RGB

#1 MONITOR: Samsung 49" Odyssey CRG9 QLED (32:9, 5120x1440p@120Hz, 8bit RGB, HDR1000)

#2 MONITOR: Samsung 49" Odyssey G9 QLED (32:9, 5120x1440p@240Hz, 10bit RGB, HDR1000) [used on Svive Racing D1 SIM Cockpit]

#3 MONITOR: Philips 34" 346B1C (21:9, 3440x1440p@100Hz, 8bit RGB[used with Lenovo ThinkCentre Tiny]

SPEAKERS: CORSAIR SP2500 + FX Audio DAC-X6

 

Full specs and setup details on my profile-page

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×