Jump to content

Working on a custom Basement for my Thermaltake F31 Suppressor

Rivettz
By Rivettz
in Cases and Mods
 Share
Posted

Hello All! 

 

Allow me to show you something that I'm working on. This is a custom basement for my Thermaltake F31 Suppressor as the ones that are sold with the case will not work with how I want it to work. This steel is 14 gauge almost 2mm thick. I did not bend this steel, I had a local shop do it for me. All the holes you see I drilled and slots I cut, you can tell by the way the dont line up. I had to do some filling and sanding before the first paint coat. I think its looking good so far, Tell me what you think and post your Mods in progress down below!

298926337_1951659021891541_6959996370952833594_n.jpg

298930783_1434776957028029_6852597821098633352_n.jpg

299243665_1008374339844080_7550534433714008938_n.jpg

298612340_434485655287946_7323785220877555692_n.jpg

298893424_744420209990016_8353970777037266248_n.jpg

298585793_405022141760914_8462693557511223942_n.jpg

298841499_3199002533675152_6063602494518627712_n.jpg

299264169_470831854569886_5320423955218117345_n.jpg

Marline
Top Loop:
Thermaltake Pacific PR2U Dual 5.25" Bay D5 Pump/Resorvior Combo / EK ZMT Tubing / A mixture of Chrome Plated Brass Rotary Fittings Bit Fenix and Alpha Cool / Alphacool NexXxos 280mm 45mm Thick Copper Pass-through Radiator / Alphacool NexXxos 140mm 45mm Thick Copper Radiator / XSPC G1/4 1/2ID Chrome Compression Fittings / Freeze Mod AM4 CPU Waterblock / 3x Noctua Redux 140mm fans
The Bottom: 
Custom Made 2mm Thick Steel PSU Shroud / Aqua Computer Aqua Tube POM Reservoir / Alphacool Eisdeck 5 w/D5 655 Pump / EK ZMT Tubing / Alphacool 45° Chrome Plated Brass Rotary Fittings / Bitfenix 90° Chrome Plated Brass Rotary Fittings / Alphacool Chrome Plates Brass Pass Through Fittings / Koolance QD3 Quick Disconnects / Bitfenix Full Cover Water Block 2080ti / Alphacool NexXxos 200mm 45mm Thick Copper Radiator / Noctua Chromax 200mm Fan / The fluid I used for both was EK Cryofuel Acid Green
Computer Specs:
Thermaltake F31 Suppressor / Ryzen 9 3950X / 32gb G. Skill 3200mhz RAM / Asus B550-E motherboard / Zotac RTX 2080 ti 11gb / EVGA 1000 GS PSU / Samsung 970 Evo Gen3 NVMe SSD / Western Digital SN850X Gen 4 NVMe SSD / 4x PNY 120 gb SSDs in RAID 0 / 1x Spectre 512gb SSD / 1x Patriot 240gb SSD / 1x 1Tb Western Digital Black 7200RPM HDD / 1x 2Tb Seagate 5400RPM HDD / Windows 10
Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×