Motherboard stuck on white light after installing windows

[jarhead702]

So I'm doing my first build today. I installed everything according to the Linus Tech Tips guide, and during my pretest sometimes the motherboard (X570 Tuf Plus wifi) would stay on the white light after I turned it on. I would swap the display port to a different port of the graphics card (evga 3080) and it'd be fine. I put everything in the case, it got to the bios just fine, I plugged in a flash drive with a windows install in it, and installed windows. After the install was completed the screen went black and the motherboard started cycling through the yellow red and white lights. I turned off the computer and turned it back on and the mother board remained stuck on the white light. I tried swapping displayport slots a bunch of times, I tried removing the flash drive, I tried starting it without the displayport and then putting it back in on the next I restarted it, I reseated the graphics card, nothing. It remains stuck on the white light. I'm a first time builder and am freaking out a little bit, so any help and reassurance would be gratefully appreciated. Thanks!

[JKRsega]

What are your full specs? Motherboard CPU everything.

[jarhead702]

https://pcpartpicker.com/list/TVXMwc
Here are the full specs

[jarhead702]

9 minutes ago, JKRsega said:

What are your full specs? Motherboard CPU everything.

https://pcpartpicker.com/list/TVXMwc
Here are full specs

AMD Ryzen 9 5900X 3.7 GHz 12-Core Processor 
Noctua NH-D15 chromax.black 82.52 CFM CPU Cooler  
Asus TUF GAMING X570-PLUS (WI-FI) ATX AM4 Motherboard     
Corsair Vengeance LPX 64 GB (2 x 32 GB) DDR4-3200 CL16 Memory    
Samsung 970 Evo Plus 2 TB M.2-2280 NVME Solid State Drive       
Seagate Barracuda Compute 2 TB 3.5" 7200RPM Internal Hard Drive
EVGA GeForce RTX 3080 10GB LHR 10 GB FTW3 ULTRA GAMING LHR Video Card
NZXT H510 Flow ATX Mid Tower Case
EVGA SuperNOVA GA 850 W 80+ Gold Certified Fully Modular ATX Power Supply

[RONOTHAN##]

Getting stuck on boot (the white LED) is usually a problem with detecting the boot media, so an issue with the storage. I'd try to unplug the SSD and HDD to see if that helps get the system POST, though this type of issue is very annoying to troubleshoot.

[JKRsega]

The video I've just watched is saying the BOOT LED is staying on. Have you installed windows?

[JKRsega]

2 minutes ago, RONOTHAN## said:

Getting stuck on boot (the white LED) is usually a problem with detecting the boot media, so an issue with the storage. I'd try to unplug the SSD and HDD to see if that helps get the system POST, though this type of issue is very annoying to troubleshoot.

Thank you Ronathan.

[jarhead702]

17 minutes ago, RONOTHAN## said:

Getting stuck on boot (the white LED) is usually a problem with detecting the boot media, so an issue with the storage. I'd try to unplug the SSD and HDD to see if that helps get the system POST, though this type of issue is very annoying to troubleshoot.

The manual says green is boot and white is VGA, when it turns green it's booted. It's booted up and detected the SSD HDD and the Windows Boot Manager before so I'm having a hard time diagnosing the problem.

[JKRsega]

https://www.asus.com/support/FAQ/1042678

[jarhead702]

I've since tried HDMI, different Displayport slots, different monitor, different graphics card, different PCI-E slot, and yet, nothing. I think the motherboard is defective.