Jump to content

No display after installing new Ryzen 7 5700x on b450m bazooka motherboard

Juanjo8918
By Juanjo8918
in Troubleshooting
 Share
Go to solution Solved by GuiltySpark_,
7 minutes ago, Juanjo8918 said:

I downloaded bios version 7A38vHE which was the one before the latest one that’s on beta

That's AGESA 1.0.0.6, that's not going to work. 

 

You need BIOS 7A38vHH

 

image.thumb.png.83229a1dc76869a92873c8706cdfeb70.png

Posted

I recently bought a new Ryzen 7 5700x cpu to replace my Ryzen 5 cpu, but after installing is there’s no display. The fans and lights all turn on. There is no bent pins I've updated the bios and restarted the CMOS but nothing has worked so far. Anymore suggestions? Thanks I’m advance 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Did you update the BIOS with a compatible CPU? Did you the system work when using that CPU?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Fasauceome said:

Did you update the BIOS with a compatible CPU? Did you the system work when using that CPU?

100% this he have old bios for sure

(◑‿◐)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Valkyrie Lenneth said:

100% this he have old bios for sure

OP said the BIOS was updated, I want to make sure that it was completed successfully by the motherboard.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Is your display connected to your dedicated GPU? What Ryzen 5 are you upgrading from?

Phobos: AMD Ryzen 7 2700, 16GB 3000MHz DDR4, ASRock B450 Steel Legend, 8GB Nvidia GeForce RTX 2070, 2GB Nvidia GeForce GT 1030, 1TB Samsung SSD 980, 450W Corsair CXM, Corsair Carbide 175R, Windows 10 Pro

 

Polaris: Intel Xeon E5-2697 v2, 32GB 1600MHz DDR3, ASRock X79 Extreme6, 12GB Nvidia GeForce RTX 3080, 6GB Nvidia GeForce GTX 1660 Ti, 1TB Crucial MX500, 750W Corsair RM750, Antec SX635, Windows 10 Pro

 

Pluto: Intel Core i7-2600, 32GB 1600MHz DDR3, ASUS P8Z68-V, 4GB XFX AMD Radeon RX 570, 8GB ASUS AMD Radeon RX 570, 1TB Samsung 860 EVO, 3TB Seagate BarraCuda, 750W EVGA BQ, Fractal Design Focus G, Windows 10 Pro for Workstations

 

York (NAS): Intel Core i5-2400, 16GB 1600MHz DDR3, HP Compaq OEM, 240GB Kingston V300 (boot), 3x2TB Seagate BarraCuda, 320W HP PSU, HP Compaq 6200 Pro, TrueNAS CORE (12.0)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, BondiBlue said:

Is your display connected to your dedicated GPU? What Ryzen 5 are you upgrading from?

Yes my display is connected to my 2070 super. And I’m upgrading from Ryzen 5 2600. On the MSI page it says that Ryzen 7 5700x is compatible 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
11 minutes ago, Fasauceome said:

Did you update the BIOS with a compatible CPU? Did you the system work when using that CPU?

Yes I updated the bios using the Ryzen 5 previously installed, and it still works fine with it. But I’m the other hand, when using the Ryzen 7 there is still no display

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Which bios did you update to exactly? MSI's website is quite shitty and even I got bamboozled when I was looking at it.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Levent said:

Which bios did you update to exactly? MSI's website is quite shitty and even I got bamboozled when I was looking at it.

I downloaded bios version 7A38vHE which was the one before the latest one that’s on beta

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
7 minutes ago, Juanjo8918 said:

I downloaded bios version 7A38vHE which was the one before the latest one that’s on beta

That's AGESA 1.0.0.6, that's not going to work. 

 

You need BIOS 7A38vHH

 

image.thumb.png.83229a1dc76869a92873c8706cdfeb70.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, GuiltySpark_ said:

That's AGESA 1.0.0.6, that's not going to work. 

 

You need BIOS 7A38vHH

 

image.thumb.png.83229a1dc76869a92873c8706cdfeb70.png

Ahh thank you! I’ll try it and come back with the results 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, GuiltySpark_ said:

That's AGESA 1.0.0.6, that's not going to work. 

 

You need BIOS 7A38vHH

 

image.thumb.png.83229a1dc76869a92873c8706cdfeb70.png

Yes that was it thank you so much

Link to comment
Share on other sites
Link to post
Share on other sites
  • 5 months later...
Posted

where can i find this version?

just update to the last version available and it is not working

 

image.thumb.png.21275eac9453559b3e7d85bff77f8848.png

i can't find the vHH version

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×