deepcool gammaxx 400 pro blue led dual fan installation

[Isabella00]

hi 

How do I know if CPU cooler {deepcool gammaxx 400 pro} is compatible with my motherboard {msi b560 a-pro}

I worried about deepcool gammaxx 400 pro dimension

does deepcool gammaxx fit to my motherboard without problem

[bmx6454]

it lists lga 1200 as a compatible socket in picture number 2, so it will work with your board.

[Isabella00]

3 minutes ago, bmx6454 said:

it lists lga 1200 as a compatible socket in picture number 2, so it will work with your board.

i know that but 

I worried about deepcool gammaxx 400 pro dimension

does deepcool gammaxx fit to my motherboard without problem

its big CPU cooler 

[Allyxxx]

There have been some intel motherboards people have claimed some bigger coolers didn't quite fit, because the mounting brackets made contact with a capacitor or something else on the motherboard. This one looks like it would fit.

[RONOTHAN##]

9 minutes ago, Isabella00 said:

its big CPU cooler 

 

Not that big. It shouldn't have issues with interferences with the VRM heatsinks. 

[da na]

That will probably fit. I'd be surprised if it doesn't. 

[Isabella00]

4 minutes ago, Mel0nMan said:

That will probably fit. I'd be surprised if it doesn't. 

That will probably fit...!!!

I want a sure%100 answer, my friend 

 

[Isabella00]

15 minutes ago, RONOTHAN## said:

Not that big. It shouldn't have issues with interferences with the VRM heatsinks. 

WHAT ABOUT issues with interferences with  RAM Kingston FURY Beast DDR4 RGB Memory 

dimension 

Height 41.24mm

 

 

 

 

 

 

[Middcore]

4 minutes ago, Isabella00 said:

WHAT ABOUT issues with interferences with  RAM Kingston FURY Beast DDR4 RGB Memory 

dimension 

Height 41.24mm

 

 

 

 

 

 

 

It's a 120mm single tower cooler. It's not going to overlap your RAM slots at all. 

 

If you don't believe me you could simply measure out 106mm centered over the CPU socket.

[Isabella00]

3 minutes ago, Middcore said:

 

It's a 120mm single tower cooler. It's not going to overlap your RAM slots at all. 

 

If you don't believe me you could simply measure out 106mm centered over the CPU socket.

 

[IkeaGnome]

6 minutes ago, Isabella00 said:

 

-snip-

And the cooler only is 25mm wide centered on the socket. Those fans can be placed higher on the cooler to allow for more room for RAM, just like with Noctua coolers. As long as your case has room for a taller fan. 

On top of that, unless you're using all DIMMs, you shouldn't even have to do that.

[Middcore]

Looking now, the RAM clearance height for the cooler is clearly listed and diagrammed on Deepcool's product page. (Edit: See the diagram IkeaGnome posted above.) 

 

You should note, however, that they've measured the height above the CPU heat spreader (which will vary with the type of CPU and thus the type of mounting used), not the actual height above the motherboard PCB, which will be greater.