Jump to content

gigabyte rtx 2080 low clock speeds and voltage

flowerbunny
By flowerbunny
in Graphics Cards
 Share
Posted

furmark.thumb.png.e619452222d4343e093526c1faa1608a.pnghi 

 

I have have a rtx 2080 gigabyte gaming oc 8g gpu it worked fine for over 2,5 years until the summer it started to overheat and throttle.

So since i didnt have warranty anymore i opened it and replaced thermal paste and pads it ran fine afterwards for 4 months with good thermals of about 65 degrees. 

Since a couple of days ago it i noticed it doesn't boost anymore it stayed at best around 1600 - 1700 mhz i also noticed it only pulled around 90 watts and 0,8 volts temps also dont go above 50 degrees.

Also overclocking doesnt seem to work anymore not matter what i do the gpu just keeps going at the same speeds and voltages.

I flashed the bios, uninstalled (ddu) and reinstalled the drivers, reseated it, i checked my power supply by putting the cables in different connectors, deleted my oc and ran it at default but nothing seems to work.

 

 

my specs:

RTX 2080 gigabyte gaming oc 8g

Z390 aorus pro wifi motherboard 

i7-9700k cpu 

corsair hx1000 psu 

Corsair 32 GB DDR4-3000 ram 

 

ill add more info if necerssary.

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

what about other onboard sensors? Hwinfo64 in sensor mode can read them

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

ill add those when im running furmark and ill post a screen shot 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

i just found out that my nzxt cam software was acting up so i uninstalled it when i adjusted the settings in the cam software my card woul overclock and it would behave differently so i uninstalled it but i msi afterburner still wont overclock 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

alright nzxt cam just overrode everything and just made my core clock drop its solved now can anyone tell me how i can close this topic ?

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×