(Solved) Nothing is showing on the monitor, old parts in a pc.

[MultiGamerClub]

Turns out not clearing the old config from the previous pc which ran 3000 mhz ram on old lpx 2666mhz sticks makes it to not post.. Good thing someone else is more patient than me

 

Tried it in the top slot, no signal.

Same with the bottom pcie slot, no signal..

 

Specs:

M2 Intel 660p 250gb

B350 Prime

Corsair LPX 2666mhz 4x4 16gb

Ryzen 1700 - stealth cooler

Rx 560 asus

 

Currently set it up on my loft to use it as a server to test some things out but it doesn't do anything on the monitor.. Nothing is coming up.

 

Wonder what could be wrong

 

Edited November 13, 2021 by MultiGamerClub
Added memory.

[IkeaGnome]

If it's old parts, there's a chance your CMOS battery is dead. CR2032.

What video cable are you using? 

 

[NelizMastr]

Probably memory. Most LPX kits that don’t carry a Ryzen certified sticker are very unstable or refuse to work. Try with a single stick in slot A2.

 

it’s especially bad in first gen Ryzen like this.

[MultiGamerClub]

51 minutes ago, IkeaGnome said:

If it's old parts, there's a chance your CMOS battery is dead. CR2032.

What video cable are you using? 

 

Hdmi.

 

45 minutes ago, NelizMastr said:

Probably memory. Most LPX kits that don’t carry a Ryzen certified sticker are very unstable or refuse to work. Try with a single stick in slot A2.

 

it’s especially bad in first gen Ryzen like this.

Got it to work with sticks in a2 and a4.

 

Turns out the previous config file for the memory was set to 3000mhz and that's what cause it to fail in post

 

Its now working and it worked out in the end thanks to a more patient cousin trying to solve the issue with  me