Jump to content

Evga 3080 ftw3 temps hit 60C idle and 83C in games!

MajdiO

- My case is cooler master h500m(I haven’t change the defalt of its fans)

- I have corsair h115i cooler for cpu

Link to comment
Share on other sites

Link to post
Share on other sites

what front panel do you have on it.. the Tempered glass, or the Mesh?

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Skiiwee29 said:

what front panel do you have on it.. the Tempered glass, or the Mesh?

Mesh 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Seems fine to me.

The idle temps are high, but that’s probably a fan curve thing.

pr maybe the fans are just off due to a smart fan thingy

I could use some help with this!

please, pm me if you would like to contribute to my gpu bios database (includes overclocking bios, stock bios, and upgrades to gpus via modding)

Bios database

My beautiful, but not that powerful, main PC:

prior build:

Spoiler

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

58 minutes ago, HelpfulTechWizard said:

Seems fine to me.

The idle temps are high, but that’s probably a fan curve thing.

pr maybe the fans are just off due to a smart fan thingy

It is off, shows 0% on msi afterburner, should I trun them on?

Link to comment
Share on other sites

Link to post
Share on other sites

According to EVGA's website the fans only turn on at 55C, so it's by design.

 

Is the Card clocking down in idle (to ~210Mhz) or is it running at full speed? 

If it does clock down than the temps seem to high, maybe bad airflow could explain it .

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, MajdiO said:

It is off, shows 0% on msi afterburner, should I trun them on?

Its by design.

SO dont worry about it. Let it do its think

I could use some help with this!

please, pm me if you would like to contribute to my gpu bios database (includes overclocking bios, stock bios, and upgrades to gpus via modding)

Bios database

My beautiful, but not that powerful, main PC:

prior build:

Spoiler

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

I have a H500M and it has a 3090 in it that runs about 10c cooler than yours.

It is configured like this.

20200919_104053.jpg.017f1326547fdb30f3c79138919fa1b9.jpg

 

I have a CM H500P Mesh with an EVGA  XC3 Ultra 3080 ti and it was ok with a 2080 ti but with the 3080 ti I had to add a 60mm fan below the GPU to get the temps in the 70s stock.

I Also have a Corsair 5000D and it was a total fail with a MSI Gaming X Trio. A 60mm exhaust fan like I used on the H500P did nothing in this case so I replaced it with a Lian Li O11 Dynamic.  The Lian Li O11 Dynamic has the 3080 ti in the 70s. This case has the best setup to cool a high end 30 series card.

 

My 3080 is in a CM H500 ARGB and it stays cool probably because of the Noctua nh-d15 right beside it.

 

If you are a MSI Afterburner user this works.

 

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, jones177 said:

I have a H500M and it has a 3090 in it that runs about 10c cooler than yours.

It is configured like this.

20200919_104053.jpg.017f1326547fdb30f3c79138919fa1b9.jpg

 

I have a CM H500P Mesh with an EVGA  XC3 Ultra 3080 ti and it was ok with a 2080 ti but with the 3080 ti I had to add a 60mm fan below the GPU to get the temps in the 70s stock.

I Also have a Corsair 5000D and it was a total fail with a MSI Gaming X Trio. A 60mm exhaust fan like I used on the H500P did nothing in this case so I replaced it with a Lian Li O11 Dynamic.  The Lian Li O11 Dynamic has the 3080 ti in the 70s. This case has the best setup to cool a high end 30 series card.

 

My 3080 is in a CM H500 ARGB and it stays cool probably because of the Noctua nh-d15 right beside it.

 

If you are a MSI Afterburner user this works.

 

putting a fan under the card would it be possible in this case, if yes is it worth it? Also, what is the ideal rpm for the front giant fans to cool the system? 

Link to comment
Share on other sites

Link to post
Share on other sites

I did not need it for the H500M but the H500P Mesh got one and it looked like this. It is a Noctua NF-A6x25.

20210708_112135.thumb.jpg.cd6c4fa87dc34b8ed54225bb62912126.jpg

 

 

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
Share on other sites

Link to post
Share on other sites

In afterburner click the settings tab then fan profile then click the enable custom fan profile and use the one already set up in the drop down menu that idles at 40 percent and ramps up 

-13600kf 

- 4000 32gb ram 

-4070ti super duper 

Link to comment
Share on other sites

Link to post
Share on other sites

The EVGA FTW3 3080 is a dual bios card. There should be a switch on the card (left of the PCIe power connectors). Switch that to OC now your fans should spin all the time even in idle. That also makes them spin faster during load which should decrease your temps.

biosswitch.jpg

Desktop: i9-10850K [Noctua NH-D15 Chromax.Black] | Asus ROG Strix Z490-E | G.Skill Trident Z 2x16GB 3600Mhz 16-16-16-36 | Asus ROG Strix RTX 3080Ti OC | SeaSonic PRIME Ultra Gold 1000W | Samsung 970 Evo Plus 1TB | Samsung 860 Evo 2TB | CoolerMaster MasterCase H500 ARGB | Win 10

Display: Samsung Odyssey G7A (28" 4K 144Hz)

 

Laptop: Lenovo ThinkBook 16p Gen 4 | i7-13700H | 2x8GB 5200Mhz | RTX 4060 | Linux Mint 21.2 Cinnamon

Link to comment
Share on other sites

Link to post
Share on other sites

19 hours ago, MajdiO said:

Also, what is the ideal rpm for the front giant fans to cool the system? 

I would say 100% when full gpu load.

 

3080 is another card that has over 20W in multi-monitor idle. Temps will go up on passive mode unless you have good case ventilation.

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...
On 9/9/2021 at 5:49 AM, jones177 said:

I did not need it for the H500M but the H500P Mesh got one and it looked like this. It is a Noctua NF-A6x25.

20210708_112135.thumb.jpg.cd6c4fa87dc34b8ed54225bb62912126.jpg

 

 

what is your idle and gaming temps after putting that kitten in there:)

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, MajdiO said:

what is your idle and gaming temps after putting that kitten in there:)

It idles at 41c

At stock the fans on the EVGA XC3 Ultra don't come on until the GPU hits 62c and switch off at 50c so after a game or bench it takes forever for it to get back to idle.

By contrast my ASUS ROG Strix 3080 OCs fan come on as soon as I start a bench and stay on until the GPU hits 30c. So below idle. 

 

RDR 2 at 4k 77c

SOTTR at 1080p 75c

 

It is in the 80s without it.

 

 

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×