Jump to content

I needed more airflow...

Maskot
By Maskot
in Cases and Mods
 Share
Posted

...so I made some. Don't be concerned, I measured the hole to be 110mmx110mm and plan to put an air filter over it to cover the half assed cuts.

Posted Image

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

SIR WE REQUIRE MORE AIRFLOW

Diamond 5 in League :)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Not bad, maybe should have gone in Case Mods section though

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Lian Li PC-TU100?

 

Is it sad that I can just look at the bottom and know what case that is?

Desktop: Intel Core i7-6700K, ASUS Z170-A, ASUS STRIX GTX 1080 Ti, 16GB DDR4 RAM, 512 GB Samsund 840 Pro, Seasonic X series 650W PSU, Fractal Design Define R4, 2x5TB HDD

Hypervisor 1: Intel Xeon E5-2630L, ASRock EPC612D8, 16GB DDR4 ECC RAM, Intel RT3WB080 8-port RAID controller plus expansion card, Norco RPC-4020 case, 20x2TB WD Red HDD

Other spare hypervisors: Dell Poweredge 2950, HP Proliant DL380 G5

Laptops: ThinkPads, lots of ThinkPads

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Wow it would hurt me to cut through a nice looking case

Same here, but I figured it's the bottom and then figured out how to make it look good afterwards.

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Lian Li PC-TU100?

 

Is it sad that I can just look at the bottom and know what case that is?

By the bottom do you mean his signature?
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Same here, but I figured it's the bottom and then figured out how to make it look good afterwards.

Sand down the edges and use a black sharpie I guess. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Same here, but I figured it's the bottom and then figured out how to make it look good afterwards.

are temps good now or do you think that you should raise it up a little more with felt pads under the feet

its GE (pause) TechNicks

my rig plus everything i have bought for it http://pcpartpicker.com/p/30sNV

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

By the bottom do you mean his signature?

No I meant the bottom of the case. I didn't look at the signature, never do.

Desktop: Intel Core i7-6700K, ASUS Z170-A, ASUS STRIX GTX 1080 Ti, 16GB DDR4 RAM, 512 GB Samsund 840 Pro, Seasonic X series 650W PSU, Fractal Design Define R4, 2x5TB HDD

Hypervisor 1: Intel Xeon E5-2630L, ASRock EPC612D8, 16GB DDR4 ECC RAM, Intel RT3WB080 8-port RAID controller plus expansion card, Norco RPC-4020 case, 20x2TB WD Red HDD

Other spare hypervisors: Dell Poweredge 2950, HP Proliant DL380 G5

Laptops: ThinkPads, lots of ThinkPads

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

How are your temps now?

Went from 90 to 84 with side panels on and from 86 to 80 with panels off.

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

are temps good now or do you think that you should raise it up a little more with felt pads under the feet

I'm planning on putting little feeties on it  :D

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I just hate how the paint is so jacked up now.. :P Smart mod though.

.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm planning on putting little feeties on it  :D

lol also if they are rubber or felt it might help a little with vibration 

its GE (pause) TechNicks

my rig plus everything i have bought for it http://pcpartpicker.com/p/30sNV

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I just hate how the paint is so jacked up now.. :P Smart mod though.

Yeah... I used a rotary tool, not the best tool for the job, but I got the job done, and I'll never see the jacked up paint anyways.

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

My Antec 300 also has a giant hole in the bottom :D

Linux "nerd".  If I helped you please like my post and maybe add me as a friend :)  ^_^!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

:o Look at how he butchered it!!!!!! Just look at it, what carelessness, what wickedness, what evilness. You need to steady your hands there fella  :lol:  

A water-cooled mid-tier gaming PC.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Here's an update for anyone that cares, now it looks a lot better and will keep the case dust freeeee.

Posted Image

Available from 3pm to Midnight Eastern Time (GMT-5). (>'-')> <('-'<) ^(' - ')^ <('-'<) (>'-')> You can't stop the kirby dance. 

4770k | Gigabyte GTX 970 Mini | Lian Li PC-TU100B | MSI Z87I | 2x8GB G.Skill Sniper | Noctua NH-L9i | Silverstone Strider 450W SFX | Windows 10 | 2x 250GB 840 Evo Rad 0 1x 1TB WD 2.5" | 25% gaming, 25% CAD and rendering, and 50% web browsing.
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Here's an update for anyone that cares, now it looks a lot better and will keep the case dust freeeee.

atyre2av.jpg

looks great ;)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

still 80° is hot for making such a hole.

small cases are not the easiest for airflow that is why a lot of people take towers for not only the airflow but more room for everything.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×