custom Custom motherboard

[bigbosss]

Hi i want to build a custom pc and i want to get a motherboard catering to specific specs that i require is it possible???

I want it to be 4 way sli compatible i need it to support a minimum of 2tb ram and have 8 m.2 slots and the rest can be pretty generic i need them but not too much of them. and also the board has to be water-cooled and include addressable RGB

[CommanderAlex]

4 minutes ago, bigbosss said:

motherboard catering to specific specs that i require is it possible???

Use PCPartPicker under the "Choose motherboard" option and use the filters on the side. No motherboard manufacturer will custom motherboard as that will require a lot of tooling and be unprofitable. 

[bigbosss]

Just now, SpiderMan said:

Use PCPartPicker under the "Choose motherboard" option and use the filters on the side. No motherboard manufacturer will custom motherboard as that will require a lot of tooling and be unprofitable. 

is there a mobo to fit my specifications mentioned above???

[Drama Lama]

5 minutes ago, bigbosss said:

have 8 m.2 slots

i don't know any bord that has 8 m.2 slots but I'm sure you can just a m.2 expander

5 minutes ago, bigbosss said:

2tb ram

 your option would be basically EPYC if you want more than 2tb ( the problem is that while it supports up to 4tb theoretically with currently available memory module you'd be maxed out at 2tb and would need to replace all of your ram in the future ( if you want more than 2tb )

7 minutes ago, bigbosss said:

and also the board has to be water-cooled and include addressable RGB

SP3 boards don't have mono or vrm blocks available and there isn't on that has RGB

[Drama Lama]

2 minutes ago, bigbosss said:

is there a mobo to fit my specifications mentioned above???

no

[CommanderAlex]

3 minutes ago, bigbosss said:

is there a mobo to fit my specifications mentioned above???

What chipset will you be using?? Most likely, you'll have to do HEDT platform such as Intel HEDT or AMD Threadripper if you want the max performance out of 4 way SLI. Will the 4 way SLI be for computations/research or just gaming??

 

If gaming, SLI is dead and won't see any performance increases as those will be decreasing incrementally and not worth while. 

[bigbosss]

thats fine also i want a mobo for my laptop i want it to have thunderbolt capability as well know of any boards i can get

[bigbosss]

11 hours ago, Drama Lama said:

 your option would be basically EPYC if you want more than 2tb ( the problem is that while it supports up to 4tb theoretically with currently available memory module you'd be maxed out at 2tb and would need to replace all of your ram in the future ( if you want more than 2tb )

what about threadripper pro  will that work???

and is there a pre cooled board for it