5Ghz low temps

[Hudson Griffin]

I recently upgraded my CPU from a i5-6600k to i5-9600k and overclocked it to 5Ghz and 4.7ghz cache speed with no additional voltage but I my temps seem to low to be true when I stressed the CPU it had a avg temp of 25 min 34 avg and 38 max 

I have a 240mm radiator with push pull. I was just wondering if these are normal temps or not

[RTX 3090]

1 minute ago, Hudson Griffin said:

if these are normal temps or not

 

1 minute ago, Hudson Griffin said:

38 max 

the max temp is very low, what software did you use for stress test and how long did you stress it for. Also did you stress it or just play a game for a few minutes

[glenalz81]

What did you use to stress and what did you use to monitor temps?

[Hudson Griffin]

I used CPU-Z for stressing the CPU I can't remember what I used for monitoring temps I think I might have Hardware monitor or speedfan.

[Electronics Wizardy]

2 minutes ago, Hudson Griffin said:

I used CPU-Z for stressing the CPU I can't remember what I used for monitoring temps I think I might have Hardware monitor or speedfan.

HOw much wattage did the cpu report using? Try using prime95 to stress the cpu

[Hudson Griffin]

6 minutes ago, Electronics Wizardy said:

HOw much wattage did the cpu report using? Try using prime95 to stress the cpu

CPU was pulling 180w reported for CPU-Z

[Mister Woof]

1 minute ago, Hudson Griffin said:

CPU was pulling 180w reported for CPU-Z

Not buying 38c, lol.

 

Something isn't reading right or you're looking at the wrong sensor

[Hudson Griffin]

2 minutes ago, Mister Woof said:

Not buying 38c, lol.

 

Something isn't reading right or you're looking at the wrong sensor

Ok I'll look into this later

[Hudson Griffin]

I got it finally got more accurate temps I used a combination of Prime 95 and hw monitor I got these temps 23 min 84 max no avg though when it was at the end of testing it just stayed at 84 till I turned it off.

Also I ran prime 95 torture test for 60min

[TehDwonz]

On 12/31/2020 at 8:28 PM, Hudson Griffin said:

I used CPU-Z for stressing the CPU I can't remember what I used for monitoring temps I think I might have Hardware monitor or speedfan.

HWMonitor is unreliable and speedfan is horribly out of date. Use HWInfo or LibreHardwareMonitor.