Jump to content

Will this AIO fit with mobo and case?

afaq0
By afaq0
in Cooling
 Share
Go to solution Solved by Applefreak,
16 minutes ago, afaq0 said:

Hi. I have the Cooler Master MB530P case and the MSi B550 Edge motherboard. 
I was planning on getting the MSI Mag Coreliquid 240R AIO but I’m not sure how to check if it will fit. Anyone know if it will?
F9DBBC55-5663-4CF2-92A6-9036010B9188.jpeg.a0e1a6eaae7bbe7232bcfb94784600af.jpegThank you! 

The AIO is 52 mm thick. You need at least that in clearance to mount the radiator. Of course you can get aftermarket 15 mm fans, then you will only need 42 mm of clearance. However this will set you back another 30.- or 40.- plus shipping. 

Now this only applies if you were to mount the AIO's radiator up top. If you were to mount it up front, you have ample clearance and no issue what so ever. 

Posted

Hi. I have the Cooler Master MB530P case and the MSi B550 Edge motherboard. 
I was planning on getting the MSI Mag Coreliquid 240R AIO but I’m not sure how to check if it will fit. Anyone know if it will?
F9DBBC55-5663-4CF2-92A6-9036010B9188.jpeg.a0e1a6eaae7bbe7232bcfb94784600af.jpegThank you! 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Get the specs of the AIO (height, width, depth) and then measure the clearance of your case and motherboard.

 

Measuring, still useful even in 2020 ;)

 

 

"Do what makes the experience better" - in regards to PCs and Life itself.

 

Onyx : AMD Ryzen 7 7800x3d / MSI 6900xt Gaming X Trio / Gigabyte B650 AORUS Pro AX / G. Skill Flare X5 6000CL36 32GB / Samsung 980 1TB x3 / Super Flower Leadex V Platinum Pro 850 / EK-AIO 360 Basic / Fractal Design North XL (black mesh) / AOC AGON 35" 3440x1440 100Hz / Mackie CR5BT / Corsair Virtuoso SE / Cherry MX Board 3.0 / Logitech G502

 

7800X3D - PBO -30 all cores, 4.90GHz all core, 5.05GHz single core, 18286 C23 multi, 1779 C23 single

 

Emma : i9 9900K @5.1Ghz - Gigabyte AORUS 1080Ti - Gigabyte AORUS Z370 Gaming 5 - G. Skill Ripjaws V 32GB 3200CL16 - 750 EVO 512GB + 2x 860 EVO 1TB (RAID0) - EVGA SuperNova 650 P2 - Thermaltake Water 3.0 Ultimate 360mm - Fractal Design Define R6 - TP-Link AC1900 PCIe Wifi

 

Raven: AMD Ryzen 5 5600x3d - ASRock B550M Pro4 - G. Skill Ripjaws V 16GB 3200Mhz - XFX Radeon RX6650XT - Samsung 980 1TB + Crucial MX500 1TB - TP-Link AC600 USB Wifi - Gigabyte GP-P450B PSU -  Cooler Master MasterBox Q300L -  Samsung 27" 1080p

 

Plex : AMD Ryzen 5 5600 - Gigabyte B550M AORUS Elite AX - G. Skill Ripjaws V 16GB 2400Mhz - MSI 1050Ti 4GB - Crucial P3 Plus 500GB + WD Red NAS 4TBx2 - TP-Link AC1200 PCIe Wifi - EVGA SuperNova 650 P2 - ASUS Prime AP201 - Spectre 24" 1080p

 

Steam Deck 512GB OLED

 

OnePlus: 

OnePlus 11 5G - 16GB RAM, 256GB NAND, Eternal Green

OnePlus Buds Pro 2 - Eternal Green

 

Other Tech:

- 2021 Volvo S60 Recharge T8 Polestar Engineered - 415hp/495tq 2.0L 4cyl. turbocharged, supercharged and electrified.

- Lenovo 720S Touch 15.6" - i7 7700HQ, 16GB RAM 2400MHz, 512GB NVMe SSD, 1050Ti, 4K touchscreen

- MSI GF62 15.6" - i7 7700HQ, 16GB RAM 2400 MHz, 256GB NVMe SSD + 1TB 7200rpm HDD, 1050Ti

- Ubiquiti Amplifi HD mesh wifi

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
18 minutes ago, afaq0 said:

Hi. I have the Cooler Master MB530P case and the MSi B550 Edge motherboard. 
I was planning on getting the MSI Mag Coreliquid 240R AIO but I’m not sure how to check if it will fit. Anyone know if it will?
F9DBBC55-5663-4CF2-92A6-9036010B9188.jpeg.a0e1a6eaae7bbe7232bcfb94784600af.jpegThank you! 

yeah sure it will fit

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
16 minutes ago, afaq0 said:

Hi. I have the Cooler Master MB530P case and the MSi B550 Edge motherboard. 
I was planning on getting the MSI Mag Coreliquid 240R AIO but I’m not sure how to check if it will fit. Anyone know if it will?
F9DBBC55-5663-4CF2-92A6-9036010B9188.jpeg.a0e1a6eaae7bbe7232bcfb94784600af.jpegThank you! 

The AIO is 52 mm thick. You need at least that in clearance to mount the radiator. Of course you can get aftermarket 15 mm fans, then you will only need 42 mm of clearance. However this will set you back another 30.- or 40.- plus shipping. 

Now this only applies if you were to mount the AIO's radiator up top. If you were to mount it up front, you have ample clearance and no issue what so ever. 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×