Any cable management advice?

[Zonal]

 

power supply is non-modular. Case is thermaltake level 10gt

[GoodEnough]

one, and only one advice:

zip-ties, put zip-ties everywhere (on the backside of your case i mean)

[Jumballi]

Take it apart and put it back together and then repeat 3 times, you'll see what needs to be optimized that way.

 

I find putting the cables in the motherboard first and then having them go to the power supply or drive helps as well.

Things I notice right away:

gpu power cable coming from bottom, have it come from the top to reduce sag

 

 

[TukangUsapEmenq]

Looks good enough for me, at least.

[Zonal]

33 minutes ago, Jumballi said:

Take it apart and put it back together and then repeat 3 times, you'll see what needs to be optimized that way.

 

I find putting the cables in the motherboard first and then having them go to the power supply or drive helps as well.

Things I notice right away:

gpu power cable coming from bottom, have it come from the top to reduce sag

 

 

Thanks for the advice everyone, I think I will try some things and see what’s best.

[alyen]

I don't if you have a window on the case, but you can also try hiding the cables on the back of the case so they are not so visible from the other side. You don't have grommets or covers over the cable cut outs. Rear exhaust could be rotated so the cable is less visible.