Jump to content

(USA) Is this a good deal?

12 minutes ago, Boomwebsearch said:

standard ATX boards and cases?

But at this point, we are off topic, as you are comparing apples to oranges, at least regarding form factor. Space is limited, hence my desire for an ITX form factor, telling me a larger board is cheaper, doesn't really solve my question, as the space then becomes an issue.

NOTE: I no longer frequent this site. If you really need help, PM/DM me and my e.mail will alert me. 

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, Radium_Angel said:

But at this point, we are off topic, as you are comparing apples to oranges, at least regarding form factor. Space is limited, hence my desire for an ITX form factor, telling me a larger board is cheaper, doesn't really solve my question, as the space then becomes an issue.

 

I would recommend considering mATX instead of ITX if possible since you would be able to spend more money out of your budget on important components such as the processor, graphics cards, RAM, etc that affect performance more directly. Although, it should be noted that you are going to need a more expensive PSU, case, and motherboard going with ITX than mATX or even ATX (it's not only the problem of a more expensive motherboard).

Hope this information post was helpful  ?,

        @Boomwebsearch 

Link to comment
Share on other sites

Link to post
Share on other sites

27 minutes ago, Boomwebsearch said:

 

Correct, the boards shown in my screenshot are all micro ATX boards, the point which I was trying to explain was that you can save money on the motherboard and even possibly the case by going microATX instead of the regular ATX form factor (money that could be put towards better components). Of course, this may come with a few limits added such as possible fewer memory slots, lower maximum supported RAM, more limited support with large GPUs (which is why I recommended the Gigabyte B450M DS3H specifically out of these boards). I don't understand why you think that better prices can be had with ATX since mATX boards and cases are usually cheaper than the standard ATX boards and cases?

I only said mITX is the more expensive form factor than others, nothing more. OP already set the limit to mITX board only so what you said is irrelevant

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×