Posted July 14, 2020 Hello, i recently move out and decided that i don't need my gaming pc. Brutal life strikes and i had to buy some budget laptop. I get new SSD and install fresh win 10. After like 10h of struggle i finally figure out i need change table to MBR(THANKS TO @neksmedia) , from there it was smooth ride. but then i figure out my mother board used sata 2. in bios i find sata 3 option but when i enable it system won't boot. can any one help me? i cant find any spec sheet that shows anything about Mb and sata ports. is there any change i can get close to sata 3 speeds? (i have around 200/200 MB/s atm) i updated bios its 10FI atm and added 2gb of ram (not same as 2nd one) (6gb total) laptop model: Samsung NP300v5a-s08pl Sorry for my english i learned it in tibia :D Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 14, 2020 200mb/s is good enough. The point of getting an old laptop to use a ssd is better response time. Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 15, 2020 Author On 7/14/2020 at 11:45 AM, SupaKomputa said: 200mb/s is good enough. The point of getting an old laptop to use a ssd is better response time. i mean, its ok but if there is option to go even faster for free why not using it? 21 hours ago, Escanor said: Does it detect the ssd with it enabled ? also is it mbr or gpt ? maybe bios is disabling legacy boot with it enabled for odd reason just a guess. drive is MBR atm. ill try today every bios options configuration, maybe it will boot. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 15, 2020 Author i cant install while GPT idk why, when its GPT it stuuck on coopying windows files 0% (i left it for like 18h, still no progress) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 15, 2020 Author i just tried every setting combo, when gen3 is on , here is no boot (sometimes :a disk read error occurred: sometimes : automatic repair:) idk what to do, ill just leave it atm thanks for help Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now