Jump to content

Cpu temps running 89c after installing new AIO

Iitucktuckii
 Share
Posted

I just installed the new ekwb AIO and now my temps are sitting at 89c in the bios. What did I do wrong. I plugged it in the same as the previous Corsair AIO that had no problems. It feels like there is water being pumped through the AIO. Attached are pictures of the temps in bios and the mobo lights. I’m just not sure what I did wrong

8C954729-88BC-404D-865D-3A528BE06962.jpeg

FF92EA39-D778-41AB-8C6D-E9B004A03558.jpeg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

bad mount?

not enough thermal past?

forget to remove a sticker covering the block?

Good luck, Have fun, Build PC, and have a last gen console for use once a year. I should answer most of the time between 9 to 3 PST

NightHawk 3.0: R7 5700x @, B550A vision D, H105, 2x32gb Oloy 3600, Sapphire RX 6700XT  Nitro+, Corsair RM750X, 500 gb 850 evo, 2tb rocket and 5tb Toshiba x300, 2x 6TB WD Black W10 all in a 750D airflow.
GF PC: (nighthawk 2.0): R7 2700x, B450m vision D, 4x8gb Geli 2933, Strix GTX970, CX650M RGB, Obsidian 350D

Skunkworks: R5 3500U, 16gb, 500gb Adata XPG 6000 lite, Vega 8. HP probook G455R G6 Ubuntu 20. LTS

Condor (MC server): 6600K, z170m plus, 16gb corsair vengeance LPX, samsung 750 evo, EVGA BR 450.

Spirt  (NAS) ASUS Z9PR-D12, 2x E5 2620V2, 8x4gb, 24 3tb HDD. F80 800gb cache, trueNAS, 2x12disk raid Z3 stripped

PSU Tier List      Motherboard Tier List     SSD Tier List     How to get PC parts cheap    HP probook 445R G6 review

 

"Stupidity is like trying to find a limit of a constant. You are never truly smart in something, just less stupid."

Camera Gear: X-S10, 16-80 F4, 60D, 24-105 F4, 50mm F1.4, Helios44-m, 2 Cos-11D lavs

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Did you remove any plastic film that was on the bottom of the coldplate?

If you did or there wasn't any then reseat the block. Clean off the thermal paste from the AIO and the CPU, reapply your thermal paste to the CPU and then remount it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

My guess is cooler paste or some sort of water flow issue.  Could be a fan issue but it would take time for temps to build to that after it was off for a while.  If they go right to throttle it’s because heat isn’t getting out of the cpu.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thank you both for the quick replies. I found out that I installed the two mounting brackets on each side of the block upside down and now we are sitting at 32c. Thank y’all again and I’m sorry for the stupidity 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×