Jump to content

i9-9900KS in the maximus xi hero (wi-fi) Black Ops 4 edition

dxzone12
 Share
Posted

I am currently running the Asus Maximus XI Hero (WI-FI) Black Ops 4 Edition which as far as I can tell is the same as the standard Maximus XI Hero.

Here is a link to the specs on their site: https://www.asus.com/au/Motherboards/ROG-MAXIMUS-XI-HERO-WI-FI-Call-of-Duty-Black-Ops-4-Edition/

 

There are a couple of still sealed i9-9900KS's available in my area at the moment and I am thinking of upgrading to one (currently running i5-9600K) but just wanted to get an idea of whether there would be any issues driving this chip with this board.

I know it is not on the certified CPU list for this board but it is for the standard maximus xi hero so i suspect it would still work. 

I have an ML240R cooler so I am not to worried about cooling the CPU just whether the motherbaord would have any trouble driving it.

 

Hopefully someone with a similar setup can give some advice.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you dont have excellent case airflow, be careful with the VRM thermals. It wont take too much effort to crank it to 90C if you overclock and throw heavy workloads to the CPU.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
22 minutes ago, Jurrunio said:

If you dont have excellent case airflow, be careful with the VRM thermals. It wont take too much effort to crank it to 90C if you overclock and throw heavy workloads to the CPU.

I have a coolermaster MB530P which has 3 fans in the front all intake, one at the rear exhaust and my cooler is mounted on the top with two fans in exhaust.
Do you think that would cover it or should I look into getting a fan pointed more directly at the VRM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, dxzone12 said:

I have a coolermaster MB530P which has 3 fans in the front all intake, one at the rear exhaust and my cooler is mounted on the top with two fans in exhaust.
Do you think that would cover it or should I look into getting a fan pointed more directly at the VRM

That isnt bad but you'll need to keep your eye on VRM temperatures. HWinfo for example should show it under "Asus EC"

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
15 minutes ago, Jurrunio said:

That isnt bad but you'll need to keep your eye on VRM temperatures. HWinfo for example should show it under "Asus EC"

Cheers will monitor with HWinfo if I decide to get the CPU and prop a small fan up in there if needed.
As a side note do you think a 750W PSU will be enough to drive that CPU and my RTX 2070 Super?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, dxzone12 said:

Cheers will monitor with HWinfo if I decide to get the CPU and prop a small fan up in there if needed.
As a side note do you think a 750W PSU will be enough to drive that CPU and my RTX 2070 Super?

Yes, 250w CPU and 280w GPU (at most for normal overclocking) wont push 750w PSU to its limits even in worse case scenario

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×