Jump to content

R5 3600 Temps

fastfishy2
By fastfishy2
in Cooling
 Share
Go to solution Solved by jtmoseley,
3 minutes ago, fastfishy2 said:

Hi,

Running the above CPU stock with a Cooler Master Hyper 212 Black Edition that also has two Noctua NF-P12 1300 PWM Fans mounted in push-pull config. With a fairly aggressive fan curve and an ambient temp of 22c I get upper mid 70c's during OCCT Medium Stress Test. Is this okay for this cooler and CPU? Case has good airflow and yes I did remember to take the baseplate sticker off before applying thermal paste (Noctua NT-H1 

 

Thanks

Perfectly fine. 


Don't worry about temps unless they get to 90+ degrees on spikes. 

Posted

Hi,

Running the above CPU stock with a Cooler Master Hyper 212 Black Edition that also has two Noctua NF-P12 1300 PWM Fans mounted in push-pull config. With a fairly aggressive fan curve and an ambient temp of 22c I get upper mid 70c's during OCCT Medium Stress Test. Is this okay for this cooler and CPU? Case has good airflow and yes I did remember to take the baseplate sticker off before applying thermal paste (Noctua NT-H1 

 

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, fastfishy2 said:

Is this okay for this cooler and CPU?

yes

Don't ask to ask, just ask... please 🤨

sudo chmod -R 000 /*

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It's a stress test. They're supposed to get hot.

CPU: Ryzen 9 5900 Cooler: EVGA CLC280 Motherboard: Gigabyte B550i Pro AX RAM: Kingston Hyper X 32GB 3200mhz

Storage: WD 750 SE 500GB, WD 730 SE 1TB GPU: EVGA RTX 3070 Ti PSU: Corsair SF750 Case: Streacom DA2

Monitor: LG 27GL83B Mouse: Razer Basilisk V2 Keyboard: G.Skill KM780 Cherry MX Red Speakers: Mackie CR5BT

 

MiniPC - Sold for $100 Profit

Spoiler

CPU: Intel i3 4160 Cooler: Integrated Motherboard: Integrated

RAM: G.Skill RipJaws 16GB DDR3 Storage: Transcend MSA370 128GB GPU: Intel 4400 Graphics

PSU: Integrated Case: Shuttle XPC Slim

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

Budget Rig 1 - Sold For $750 Profit

Spoiler

CPU: Intel i5 7600k Cooler: CryOrig H7 Motherboard: MSI Z270 M5

RAM: Crucial LPX 16GB DDR4 Storage: Intel S3510 800GB GPU: Nvidia GTX 980

PSU: Corsair CX650M Case: EVGA DG73

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

OG Gaming Rig - Gone

Spoiler

 

CPU: Intel i5 4690k Cooler: Corsair H100i V2 Motherboard: MSI Z97i AC ITX

RAM: Crucial Ballistix 16GB DDR3 Storage: Kingston Fury 240GB GPU: Asus Strix GTX 970

PSU: Thermaltake TR2 Case: Phanteks Enthoo Evolv ITX

Monitor: Dell P2214H x2 Mouse: Logitech MX Master Keyboard: G.Skill KM780 Cherry MX Red

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, dizmo said:

It's a stress test. They're supposed to get hot.

yeah I knew that one lol but thanks for the info. My gaming temps are fine.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
3 minutes ago, fastfishy2 said:

Hi,

Running the above CPU stock with a Cooler Master Hyper 212 Black Edition that also has two Noctua NF-P12 1300 PWM Fans mounted in push-pull config. With a fairly aggressive fan curve and an ambient temp of 22c I get upper mid 70c's during OCCT Medium Stress Test. Is this okay for this cooler and CPU? Case has good airflow and yes I did remember to take the baseplate sticker off before applying thermal paste (Noctua NT-H1 

 

Thanks

Perfectly fine. 


Don't worry about temps unless they get to 90+ degrees on spikes. 

Case: InWin 303 Motherboard: Asus TUF X570-Plus Processor: Ryzen R9-3900x GPU: Gigabyte RTX 3070 Ram: 32 GB DDR4 3000 MHZ

 PSU: Corsair CX750M Storage: 1TB Intel 660p NVME SSD and a 2TB Seagate 7200RPM HDD Mouse: Logitech G600 Keyboard: Razer Blackwidow Ultimate 2014 Headphones: Steelseries Arctis 7 Audio: Shure PGA58 with a Focusrite Scarlett Solo 3rd Gen

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Sauron said:

yes

thanks for that. Also why you gotta do my boy Elendil like that 😭

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, fastfishy2 said:

Hi,

Running the above CPU stock with a Cooler Master Hyper 212 Black Edition that also has two Noctua NF-P12 1300 PWM Fans mounted in push-pull config. With a fairly aggressive fan curve and an ambient temp of 22c I get upper mid 70c's during OCCT Medium Stress Test. Is this okay for this cooler and CPU? Case has good airflow and yes I did remember to take the baseplate sticker off before applying thermal paste (Noctua NT-H1 

 

Thanks

thats perfectly fine, r5 2600's and 3600's at 70-90c is normal (especially if you raised the voltage)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, fastfishy2 said:

thanks for that. Also why you gotta do my boy Elendil like that 😭

It wasn't personal.

 

Actually now that I think about it it was definitely personal.

Don't ask to ask, just ask... please 🤨

sudo chmod -R 000 /*

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×