Ryzen 2600/X + 120mm cooler performance

[Aniallation]

Is anyone here running a 2600/2600X with say a Hyper 212/Gammaxx 400 and can chime in on your temps?

 

I recently upgraded from a 1200 to a 2600X and retained my Gammaxx GT RGB, which supposedly performs about the same if not slightly better than a 212 Evo, and applied new MX4. Idle sits around 38-40c and under p95 sits around 73c-75c. Are these normal temps for this setup? I don't remember what temperatures I got before with my 1200 @ 3.9GHz/1.4V when I ran the same tests, but I don't remember load temps being this high even though it was a lower power CPU.

 

 

[Statik]

Those temps are perfectly normal.

 

I run similar temps on a 3800x on 240mm AIO.

 

The 2600x has a max safe temp of 95C, and idle doesn't really matter, it's load temps what counts. So I would say as long as your load is under 90C you're good to go.

[Fasauceome]

I don't use a second gen CPU with a tower cooler but 75 degrees in prime 95 is a good temp in any case, well within safe and cool boundaries.