PC Building noob in need

[ImAkilles]

Built my first pc yesterday and i was excited to us it today but my ram wont run at the rated speed. 

 

 

its a 32 gig kit @ 3600MHz. When i enable the DOCP profile in bios i get an error and boot into safe mode. my ram is on the supported list on my motherboard's website.

 

when i enable docp i get this warning

 

 

this is the error i get when i try to boot with DOCP enabled. 

 

 

the overclock settings that docp changes

 

 

running on a ryzen 3700x (4 GHz) no overclock, ASUS Prime X570-P, gskill ripjaws 32gig that is rated at 3600 MHz but wont boot at that speed, boot drive is a WD Black SN750 NVMe SSD

[boggy77]

ram in slots 2 and 4?

 

[ImAkilles]

1 minute ago, boggy77 said:

ram in slots 2 and 4?

 

counting from the cpu its 1 and 3

[boggy77]

 

1 minute ago, ImAkilles said:

counting from the cpu its 1 and 3

switch them to 2 and 4 and it should work

[ImAkilles]

15 minutes ago, boggy77 said:

 

switch them to 2 and 4 and it should work

thank you so much. ive been stressing over this for the past day and i could not figure it out.