Jump to content

Phantek Enthoo Pro M

DTX
By DTX
in Cases and Mods
 Share
Posted

Any one here have this case, either the normal or rgb SE version and could measure the space between the PSU shroud and the top of the case? I need to know the vertical clearance in this case.

 

Thank you

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Vertical clearance? As in CPU cooler/graphics card height clearance? Because with 7 PCIe slots it is not going to hold XL-ATX boards like the Gigabyte TRX40 Aorus Xtreme that needs 8 PCIe slots of space (even though it can go far enough on the sides to hold E-ATX boards)

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
46 minutes ago, Jurrunio said:

Vertical clearance? As in CPU cooler/graphics card height clearance? Because with 7 PCIe slots it is not going to hold XL-ATX boards like the Gigabyte TRX40 Aorus Xtreme that needs 8 PCIe slots of space (even though it can go far enough on the sides to hold E-ATX boards)

I am trying to fit a PS3 motherboard in it which is about 12.8 inches tall when standing vertically on the PSU shroud, since it is losing the shell, it might lose 1/4 inch or so. From measuring pictures on photoshop, I get roughly 13.06 inches from shroud to top so I wouldn't be able to fit top fans without offsetting them with the included radiator top rack and pushing the motherboard close to the backplate which I wanted to avoid.

 

I saw the Full tower version of this case but it has a smaller front window, too much big for my desk and has a bunch of hdd cages that i definitely don't need. I want to be sure I can fit on the mid case or if I need to go to a full.

 

I started looking at $60 cases, now I'm poundering buying a $110 case, I will try to find the shortest case that fits XL-ATX board, it would be so lame if I need to go with a full case.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, DTX said:

From measuring pictures on photoshop,

the 5kg original huh?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Jurrunio said:

the 5kg original huh?

Yes, launch model CECHA01 I bought back in 2006, I want to do something to cool it before it dies, It won't have a PSU and shell so I might lose about 815 g from the PSU, up to 1 kg total. I wonder if the shroud would hold the weight with a PSU installed or if I'm better off looking for a case that has top PSU and I can put the 4kg PS3 assembly on the bottom

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×