Jump to content

Brand new build

Mirano
By Mirano
in CPUs, Motherboards, and Memory
 Share
Go to solution Solved by boggy77,

need to place them in 2 and 4. enable xmp and manually set dram voltage to 1.35 (sometimes there's a bug and auto doesn't work).

if still doesn't work, try changing frequency to 3000 or 2933. 2000 series ryzen sometimes doesn't work with ram higher than 3000.

Posted

Good day,

 

I just got myself a new build:

AMD Ryzen 7 2700X Wraith Boxed

Asus PRIME X470-PRO

Corsair Vengeance LPX CMK32GX4M2B3200C16

Corsair RM750x (2018) Zwart

 

I tried to enable XMP to get it to 3200Mhz, but the motherboard restarted 3 times and entered safe mode, stating that the last bios edit was not gonna work.

 

I turned off the PC and reseated the RAM sticks, without success. I tried to manual turn off XMP and set clock to 3000, did not work, yet 2833 did work. I started memtest and got the following errors:

 

Is this memory related or could it be the CPU?

photo_2020-02-03_13-06-13.jpg

Link to comment
https://linustechtips.com/topic/1151753-brand-new-build/
Share on other sites
Link to post
Share on other sites
Posted

Could be either or both tbh

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1151753-brand-new-build/#findComment-13266834
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

need to place them in 2 and 4. enable xmp and manually set dram voltage to 1.35 (sometimes there's a bug and auto doesn't work).

if still doesn't work, try changing frequency to 3000 or 2933. 2000 series ryzen sometimes doesn't work with ram higher than 3000.

Link to comment
https://linustechtips.com/topic/1151753-brand-new-build/#findComment-13266857
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, boggy77 said:

need to place them in 2 and 4. enable xmp and manually set dram voltage to 1.35 (sometimes there's a bug and auto doesn't work).

if still doesn't work, try changing frequency to 3000 or 2933. 2000 series ryzen sometimes doesn't work with ram higher than 3000.

Can misplacing the RAM modules cause errors in memtest?

 

i will try this later!

Link to comment
https://linustechtips.com/topic/1151753-brand-new-build/#findComment-13266874
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×