Jump to content

Shold I tighten my CPU cooler?

Hi!

 

I've got a Ryzen  5 3600 and the stock cooler.

 

So I've built my first PC and my CPU is around 43 degress in idle. While gaming it goes to about 57 degress. Should I tighten my CPU cooler cause i have a feeling i didnt tighten the screws enough?

Link to comment
Share on other sites

Link to post
Share on other sites

Those temps are great. Nothing wrong with them. Sounds like you have your cooler mounted properly and no need to attempt to tighten it down anymore. 

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites

Link to post
Share on other sites

Temps looks perfectly fine and overtighting your CPU cooler can actually damage it so just leave it as is.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites

Link to post
Share on other sites

I was expecting much higher temperatures with the stock cooler.

Nothing wrong there.

CPU: Ryzen 7 5800X Cooler: Corsair H100i Platinum SE Mobo: Asus B550-A GPU: EVGA RTX 2070 XC RAM: G.Skill Trident Z RGB 3200MHz 16CL 4x8GB (DDR4) SSD0: Crucial MX300 525GB SSD1: Samsung QVO 1TB PSU: NZXT C650 Case: Corsair 4000D Airflow Monitor: Asus VG259QM (240Hz)

I usually edit my posts immediately after posting them, as I don't check for typos before pressing the shiny SUBMIT button.

Unraid Server

CPU: Ryzen 5 7600 Cooler: Noctua NH-U12S Mobo: Asus B650E-i RAM: Kingston Server Premier ECC 2x32GB (DDR5) SSD: Samsung 980 2x1TB HDD: Toshiba MG09 1x18TB; Toshiba MG08 2x16TB HDD Controller: LSI 9207-8i PSUCorsair SF750 Case: Node 304

Link to comment
Share on other sites

Link to post
Share on other sites

My mistake i was testing with Minecraft cause Apex was still downloading. Idle temps are around 43 degrees and around 68 degrees when gaming

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, Privatech said:

My mistake i was testing with Minecraft cause Apex was still downloading. Idle temps are around 43 degrees and around 68 degrees when gaming

68 is still well within spec so I would leave it as is, I doubt you would get lower by any significant margin by tightening or remounting your cooler. The 7nm chiplet design is actually quite hard to keep cool so even with a good aftermarket cooler there will be limited improvement in thermals as the boost algorithm uses up any extra headroom

 

edit: I would probably download something to stress test with to see how temperatures do under 100% load eg Cinebench and test for peak temperature there, just to be sure you aren't going to hit thermal limit under extreme cases

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×