Overclocked my Ryzen 2600

[CGT]

Overclocked my Ryzen 2600 @ 4.0 with 1.35v stable in rendering, this is the best i got with deepcool gammaxx 300t, the stock one is cancer.. Should i get an Kraken Liquid Cooler? and push it over 4.2?

[Princess Luna]

Not really, 200mhz (if it even gets to that) ain't worthy the expense of a very expensive aio.

[5x5]

No, not worth the money and hassle.

[Jurrunio]

how hot does it currently run though?

[CGT]

3 minutes ago, Jurrunio said:

how hot does it currently run though?

in idle? or full load? full load normal 75 /  79 in rendering , and idle with no task 38-40, normal task max 50 - 55 like 7zip archive

[CGT]

7 minutes ago, Jurrunio said:

how hot does it currently run though?

My bad... idle , i will make a full load test in 5 min.

[CGT]

And in full load, stable

[Jurrunio]

75C, good enough to stop. Quite a lot of voltage for 4GHz tho

 

Maybe tune up the memory next?

[CGT]

7 minutes ago, Jurrunio said:

75C, good enough to stop. Quite a lot of voltage for 4GHz tho

 

Maybe tune up the memory next?

at 4.00ghz with 1.25v it's not stable in full load rendering, daily tasks yes also max voltage recomanded by AMD is 1,425..@4.1ghz,

[Jurrunio]

4 minutes ago, CGT said:

at 4.00ghz with 1.25v it's not stable in full load rendering, daily tasks yes also max voltage recomanded by AMD is 1,425..@4.1ghz,

but what about 1.3? I have seen 2600 run 4GHz at 1.15V stable so there's that

[CGT]

28 minutes ago, Jurrunio said:

but what about 1.3? I have seen 2600 run 4GHz at 1.15V stable so there's that

Did not test that, you can't have a stable cpu 4.0ghz at 1,15v...lies...make a 3d rendering and in 20 seconds you will get a black screen...I seen some  4.2Ghz @ 1.375V but with Noctua fans... i will lower it tomorrow, but at 1.25v it's unstable in high task rendering jobs..

[CGT]

10 hours ago, Jurrunio said:

but what about 1.3? I have seen 2600 run 4GHz at 1.15V stable so there's that

got better and stable

[Vejnemojnen]

11 hours ago, Jurrunio said:

but what about 1.3? I have seen 2600 run 4GHz at 1.15V stable so there's that

mine was not stable on 1.325V 4.0Ghz. Cinebench crashed every time I've tried.

 

The lottery is still a factor to take into account. 

[CGT]

Just now, Vejnemojnen said:

mine was not stable on 1.325V 4.0Ghz. Cinebench crashed every time I've tried.

 

The lottery is still a factor to take into account. 

mine is stable at 1.275 4.0ghz, blender, cinebench score 1282

[Vejnemojnen]

1 minute ago, CGT said:

mine is stable at 1.275 4.0ghz, blender, cinebench score 1282

I'll see what I can do. I don't have 2600 at my disposal now, as I've sent it back and asked for a swap. Some day next week I'll get the replacement cpu, and I'd like to aim 1.3V 4.0Ghz, or 1.35V 4.1Ghz. Even for 1400 CB R15 score. (former 2600 managed 1381 pts on 1.35V)

[CGT]

2 minutes ago, Vejnemojnen said:

I'll see what I can do. I don't have 2600 at my disposal now, as I've sent it back and asked for a swap. Some day next week I'll get the replacement cpu, and I'd like to aim 1.3V 4.0Ghz, or 1.35V 4.1Ghz. Even for 1400 CB R15 score. (former 2600 managed 1381 pts on 1.35V)

4.1ghz with 1.35v it's unstable i tested this morning..

[CGT]

4 minutes ago, Vejnemojnen said:

I'll see what I can do. I don't have 2600 at my disposal now, as I've sent it back and asked for a swap. Some day next week I'll get the replacement cpu, and I'd like to aim 1.3V 4.0Ghz, or 1.35V 4.1Ghz. Even for 1400 CB R15 score. (former 2600 managed 1381 pts on 1.35V)

MAX 1.425v for 4.1 but u need cooling

[CGT]

17 minutes ago, Vejnemojnen said:

I'll see what I can do. I don't have 2600 at my disposal now, as I've sent it back and asked for a swap. Some day next week I'll get the replacement cpu, and I'd like to aim 1.3V 4.0Ghz, or 1.35V 4.1Ghz. Even for 1400 CB R15 score. (former 2600 managed 1381 pts on 1.35V)

Got it stable at 4.05 1.35v but it don't think it's worth it...

[CGT]

36 minutes ago, Vejnemojnen said:

I'll see what I can do. I don't have 2600 at my disposal now, as I've sent it back and asked for a swap. Some day next week I'll get the replacement cpu, and I'd like to aim 1.3V 4.0Ghz, or 1.35V 4.1Ghz. Even for 1400 CB R15 score. (former 2600 managed 1381 pts on 1.35V)

Got the best of it  stable

[C17H23NO2]

I got mine to 4.1 Ghz via offset OC. 
Idle around 1.319V and under full load 1.275 - 1.28V 
35-40°C Idle , around 65°C max when playing CPU heavy games, otherwise high 50's with a benchmark high of 72°C. 
Dark Rock 4 (not pro) and a 7 year old case. :'D 
I am happy. 

[Vejnemojnen]

Lucky @C17H23NO2. When i set auto voltage, it crashed, though with 1.45volts. When i set positive offset, it still crashed, with higher voltages (1.48 if i recall) 

 

If i tried 4050 MHz and negative offset, it failed to boot, had to clear cmos. 

 

Funny.

[XHT_001]

you will be needing a 280mm for over 4.2, i can get mine with the extra +4 CPU power cable to 4.4, but it runs at 120c

 

so i have one of these, and its not really making much of an effort https://www.thermaltake.com/water-3-0-riing-red-280.html

 

running 3dmark etc, main CPU temp gets to 60c

[XHT_001]

7 hours ago, CGT said:

mine is stable at 1.275 4.0ghz, blender, cinebench score 1282

what cinebench, my score is 2674 without overclocking in R20

[C17H23NO2]

2 hours ago, Vejnemojnen said:

Lucky @C17H23NO2. When i set auto voltage, it crashed, though with 1.45volts. When i set positive offset, it still crashed, with higher voltages (1.48 if i recall) 

 

If i tried 4050 MHz and negative offset, it failed to boot, had to clear cmos. 

 

Funny.

Holy whut...what are you running now?
Thought with 1.35V almost every 2600 should be on a comfy 4.1 
Had to play around with the offset thingy a bit, was used to fixed voltage on my FX. Finding out the normal voltage and stuff then adapting. 

[C17H23NO2]

36 minutes ago, XHT_001 said:

what cinebench, my score is 2674 without overclocking in R20

Can give you mine too. 
CB R20 3117 is the last saved score on it. Don't know under what conditions i tested but with the 4.1 Ghz OC.