First build in many years and everything starts up but.....no display on hdmi

[AndyB-NZ]

Hello all

 

I'm hoping someone can help me figure out where I'm going wrong. This is my first build in many years and first time I'm using an AIO

 

Part I'm using:

CPU: Ryzen 5 3600x

Mobo: Asus X570-Plus

Ram: Corsair Vengerance pro (2x16Gb)

PSU: EVGA 850w P2  supernova

AIO: Coolermaster ML240R

 

So i've plugged everything in, went to boot it and all lights come on but nothing on the monitor (on board graphics)

I've checked power connectors, swapped ram (including sockets and running only 1 stick), tested monitor etc

 

It lights up the Q-led's the Dram light turns on then turns ff as the CPU light turns on, then CPU light turns on as the VGA light turns on, then the boot light comes on along with thevga light staying on and the keyboardthen lights up, but still no output to the monitor

 

Any ideas what could be wrong?

[Vizzaral]

After some research, the 3600X doesn't have an iGPU. You need a descrete GPU for this build.

[SenKa]

There is no integrated graphics, that may be your issue!

[AndyB-NZ]

ahhhh ok thanks so much for that.... I guess it's time to buy a GPU then haha

[Akira Shimazu]

just get the cheap 560 or 1030