Jump to content

New GPU fan runs 100% 24/7

JacobeeGames
By JacobeeGames
in Graphics Cards
 Share
Posted

I just picked up an R9 270 and the fan is running 100% speed 24/7. It's a reference card but it's not overheating, Afterburner shows a temp of high 20's low 30's at idle. Back of the card is barely warm, and the air it's spitting is barely warm. I think it's a driver issues since I can't control the fan speed in Afterburner. With the Adrenaline drivers installed it shows up in device manager as an "AMD Radeon R9 200 series" but if I force install the Windows recommended driver from right clicking in device manager it actually shows up as an R9 270, Afterburner did the 200 series thing too and now shows correctly, but still no control in Afterburner. I used DDU before installing the card, I uninstalled the driver and reinstalled it again, I even tried installing it on-top of itself. Any ideas? I'd rather not have the fan die, the original owner also said it never did this.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Go into MSI Afterburner and in settings I believe there is stuff for AMD cards. 

CPU: Intel Core i9 9900K | Ram: 16GB Corsair LPX 3000 DDR4 | Asus Maximus XI Hero Z390 | GPU: EVGA RTX2080 XC | 960 EVO Samsung 500GB M.2 | 850 EVO Samsung 250GB M.2 | Samsung 1TB QVO SSD | 1TB HDD WD Blue 

Laptop: Dell XPS 13 2 in 1 9370 | I7 1065G7 | 32GB DDR4 | 1TB SSD |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The card being recognized as 'AMD Radeon R9 200 series' is perfectly normal.

AMD shifting to this identifier system sometime ago -- I think Window is finding an older version of the graphics drivers.

 

What brand if your R9-270?

Are you able to control the fan speed through Adrenaline via Radeon Settings?

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K @ 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
17 hours ago, -rascal- said:

The card being recognized as 'AMD Radeon R9 200 series' is perfectly normal.

AMD shifting to this identifier system sometime ago -- I think Window is finding an older version of the graphics drivers.

 

What brand if your R9-270?

Are you able to control the fan speed through Adrenaline via Radeon Settings?

I was not able to control the fan in the separate Overdrive app, Overdrive within Radeon settings, or within Afterburner. As far as the brand of GPU, it's the stock reference card thats all I know. 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×