Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited


This user doesn't have any awards

About JacobeeGames

  • Title

Recent Profile Visitors

561 profile views
  1. I added another 8 gigs of ram to my pc for s total of 16 gig, I started tweaking my memory settings to run at a faster speed, nothing insane just from 1333mhz to 1600, and it started looping in automatic repair. I ended up removing the ram I added and the system is back to the way it was before. It's still looping even after I loaded factory defaults in the bios. Any ideas?
  2. There should be preapplied thermal paste but some manufacturers put a sticker overtop of it to prevent accidental removal of it before installation. I am not sure whether or not your cooler has that though, but yes those are really high temps for idle, should be more in the sub 40's at most
  3. Thanks! That's what I was thinking too. I have a few large games like GTA V, world of tanks, PayDay2 etc, I would fill that SSD in no time.
  4. Well considering that you have a 1060 I would recommend nothing less than an i7 of that era, I would get the best 4th gen i7 from a reputable seller that you are comfortabe paying the price for. Basically the cheapest 4770 or 4790 you can find in a working condition.
  5. Now, I may sound crazy here but this sounds like a cooler issue. Maybe somehow the stock thermal paste got wiped off and never replaced or you forgot to pull the sticker covering off before installing the cooler? That would explain it since those are temps I would expect for it to be under a moderate load.
  6. You are correct about the work station performance being better but gaming is a very different scenario. Now, it really depends on the CPU's and motherboard chosen as well as even ram configurations because of the way dual socket boards split the memory slots. To achieve decent performance on a dual socket motherboard you would need some pretty decently fast CPU's to start with in which case it might even be faster to run single socket anyways. Games really can't use much more than about 4-6 cores at most, and say you have a pair of quad cores, your effectively splitting the workload across tw
  7. I have an older Seagate "white label" Barracuda hard drive and recently I've been having super long booting times and some BSOD's and post errors on startup. A day or two ago task manager was showing response times in the 1000ms+ range on the drive and it wouldn't even show up in task manager about an hour ago (It does now after a little bit of tinkering). Now this drive has gone through many many hardware changes, it has had about 2 different graphics cards and an entire motherboard/CPU/Ram swap without a reinstall of Windows(Yes I know). Now this drive is about 6 years old if I recall correc
  8. I currently run an AMD R9 270 reference edition card and my friend just upgraded to a 1660 ti, in Cinebench R15 OpenGL test my card scores significantly higher than his 1660 ti, like we're talking a difference of 40+ fps in the test. We switched to Unigine Heaven benchmark and ran it in OpenGL and no surprise his card wins but not by very much running the same exact settings I was within 400 points of his 1660 ti and I had a higher maximum and the same minimum FPS with the average fps being only about 10 fps lower. Is this just an effect of AMD versus Nvidia cards or is something wrong? It sho
  9. It won't even begin to boot to anything. It can't make it passed bios.
  10. It won't even make it to the os. I tried a different drive with a different install as well. All it does is show the motherboard splash screen then go to a low power state then retry
  11. I already tried that. Multiple times. It even gave me an error for system clock reset and a cmos checksum error as well as a battery removed error. It reset but it's still boot looping
  12. My pc is currently boot looping and not responding to keyboard commands. I had just swapped the motherboard and cpu from my old a8 5500 amd cpu to my "new" Intel core i5 4670. It had booted up earlier but I changed a few things in the bios and I can't get it to boot and I can't get back into bios to reset it. Doesn't want to respond to my attempts to clear cmos. Any help maybe I'm not something right?
  13. 1. It would be pretty easy to infer what I meant by that. 2. You also have to realize the TDP won't always be the max power draw of a CPU due to boosting and such. Not to mention some Ryzen chips may need some pretty serious voltage to overclock far. I would figure this system probably pulls around 300 watts under full load as is. So maybe another 100 watts left over to play with. For some people that's enough, however we also run unto efficiency curve issues and the fact that you'll be running the PSU near max usage which can cause it to degrade faster over time and eventually take a crap on
  14. I'm liking this build a lot more than the other one. Suitable PSU, the SSD is okay I guess but same as last one, no hard drive. He's really gonna need at least a 1tb hard drive for his mass storage of games and other stuff. That case should do well, but were back to B450, we wanted to go X570 because of PCI-e 4.0, we are considering high speed PCI-e based storage later on and would like PCI-e 4.0 capability.