Jump to content

How universal are rgb controllers?

Go to solution Solved by Ja55ie,
12 hours ago, jonnyGURU said:

No.  Because most of them are four pin. 

 

Are any of the wire colored?  Are some pins populated while one is not?  Can you take a picture of the connector? 

Hey Jonny thanks for the help. I actually Recieved the case today and was able to use 3 additional azza fans with the case and even control all the lighting. 

So I just purchased an AZZA Inferno 310 case and it apparently has 2 extra headers on its controller board for additional rgb items. It currently comes with 2 rgb front fans. 

 

I am wondering how universal rgb is. I know that additional Azza Hurricane Lite RGB fans (which are also identical to the ones that come preinstalled in the case) work with the controller. 

 

Would I be able to plug in any rgb fan and it would work with the controller? 

Would CPU fans with rgb work as well if I plugged in the 4 pin connector to the case controller? 

 

I want to know before I purchase any more fans.

| CPU: AMD Ryzen 7 5800X | Motherboard: MSI MPG X570 GAMING PLUS | CPU Cooler: MSI MAG CORELIQUID 240R 
 | GPU: MSI 3080 Ti VENTUS 3X 10G OC | | RAM: G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 | PSU: MSI MPG A750GF Gold Fully-Modular | Mouse: MSI CLUTCH GM50 | Keyboard: MSI Vigor GK60 Cherry MX Red | 

| Headset: MSI DS502 GAMING Headset | Case: MSI MPG SEKIRA 100R | 

| Displays: AOC AGONAG241QX Gaming Monitor 24" & Acer CB282K 28.0" 2160p 60Hz HDR IPS | Wrist Rest: MSI Vigor WR01 Wrist  Rest | 

Link to comment
https://linustechtips.com/topic/1040911-how-universal-are-rgb-controllers/
Share on other sites

Link to post
Share on other sites

I think Cooler Master ARGB ones and Befenix Spectrum RGB ones follow open standard, but Corsair ones certainly dont.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

"ARGB" (addressable RGB) is a standard.  It's a +5V, data and ground.

 

Aura, Corsair, Asrock, JRainbow, etc. are all different.

 

ARGB is pretty much "standard", but the case didn't come with ANY documentation?  The connector isn't labeled?  Seems weird.

 

 

Link to post
Share on other sites

8 hours ago, jonnyGURU said:

"ARGB" (addressable RGB) is a standard.  It's a +5V, data and ground.

 

Aura, Corsair, Asrock, JRainbow, etc. are all different.

 

ARGB is pretty much "standard", but the case didn't come with ANY documentation?  The connector isn't labeled?  Seems weird.

 

 

The case manual just noted that the fans would connect to the attached controller. The controller seems to be the 4pin kind. So if I purchase a rgb accessory which uses 4pin and +5V connection, I should be fine? 

| CPU: AMD Ryzen 7 5800X | Motherboard: MSI MPG X570 GAMING PLUS | CPU Cooler: MSI MAG CORELIQUID 240R 
 | GPU: MSI 3080 Ti VENTUS 3X 10G OC | | RAM: G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 | PSU: MSI MPG A750GF Gold Fully-Modular | Mouse: MSI CLUTCH GM50 | Keyboard: MSI Vigor GK60 Cherry MX Red | 

| Headset: MSI DS502 GAMING Headset | Case: MSI MPG SEKIRA 100R | 

| Displays: AOC AGONAG241QX Gaming Monitor 24" & Acer CB282K 28.0" 2160p 60Hz HDR IPS | Wrist Rest: MSI Vigor WR01 Wrist  Rest | 

Link to post
Share on other sites

9 hours ago, Jurrunio said:

I think Cooler Master ARGB ones and Befenix Spectrum RGB ones follow open standard, but Corsair ones certainly dont.

Would you know of any cooler Master fans which would be compatible? 

| CPU: AMD Ryzen 7 5800X | Motherboard: MSI MPG X570 GAMING PLUS | CPU Cooler: MSI MAG CORELIQUID 240R 
 | GPU: MSI 3080 Ti VENTUS 3X 10G OC | | RAM: G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 | PSU: MSI MPG A750GF Gold Fully-Modular | Mouse: MSI CLUTCH GM50 | Keyboard: MSI Vigor GK60 Cherry MX Red | 

| Headset: MSI DS502 GAMING Headset | Case: MSI MPG SEKIRA 100R | 

| Displays: AOC AGONAG241QX Gaming Monitor 24" & Acer CB282K 28.0" 2160p 60Hz HDR IPS | Wrist Rest: MSI Vigor WR01 Wrist  Rest | 

Link to post
Share on other sites

1 hour ago, Ja55ie said:

The case manual just noted that the fans would connect to the attached controller. The controller seems to be the 4pin kind. So if I purchase a rgb accessory which uses 4pin and +5V connection, I should be fine? 

No.  Because most of them are four pin. 

 

Are any of the wire colored?  Are some pins populated while one is not?  Can you take a picture of the connector? 

Link to post
Share on other sites

12 hours ago, jonnyGURU said:

No.  Because most of them are four pin. 

 

Are any of the wire colored?  Are some pins populated while one is not?  Can you take a picture of the connector? 

Hey Jonny thanks for the help. I actually Recieved the case today and was able to use 3 additional azza fans with the case and even control all the lighting. 

| CPU: AMD Ryzen 7 5800X | Motherboard: MSI MPG X570 GAMING PLUS | CPU Cooler: MSI MAG CORELIQUID 240R 
 | GPU: MSI 3080 Ti VENTUS 3X 10G OC | | RAM: G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 | PSU: MSI MPG A750GF Gold Fully-Modular | Mouse: MSI CLUTCH GM50 | Keyboard: MSI Vigor GK60 Cherry MX Red | 

| Headset: MSI DS502 GAMING Headset | Case: MSI MPG SEKIRA 100R | 

| Displays: AOC AGONAG241QX Gaming Monitor 24" & Acer CB282K 28.0" 2160p 60Hz HDR IPS | Wrist Rest: MSI Vigor WR01 Wrist  Rest | 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×