Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

B350-Plus don't go above 2133Mhz on my New Memory

HALKBR
 Share

Hello, i want help, i have bought 2x8 3000Mhz memory and its not working above 2133Mhz.

I already enabled D.O.C.P which turns 2933Mhz with custom timings and not worked.

 

Anyone can help me?

 

PS: Bios updated.

Link to comment
Share on other sites

Link to post
Share on other sites

memory speed isn't guaranteed unfortunately. Can you manually OC to the listed speed and timings?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k (won) - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

Linux Proliant ML150 G6:

Dual Xeon X5560 - 24GB ECC DDR3 - GTX 750 TI - old Seagate 1.5TB HDD - dark mode Ubuntu (and Win7, cuz why not)

 

How many watts do I need? Seasonic Focus thread, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

What processor are you running?  Is this board the Prime board from ASUS?

 

 

2 minutes ago, fasauceome said:

memory speed isn't guaranteed unfortunately. Can you manually OC to the listed speed and timings?

 

What?  Yes it is... When you buy a 3000MHz kit it should OC to 3000MHz.  Hell it might even OC to 36000MHz.

"And I'll be damned if I let myself trip from a lesser man's ledge"

Link to comment
Share on other sites

Link to post
Share on other sites

dumb question here, did you save it and restart the PC?...

If you didn't save it than it will return the stock speed of 2133

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Velcade said:

What?  Yes it is... When you buy a 3000MHz kit it should OC to 3000MHz.  Hell it might even OC to 36000MHz.

The official supported memory speed for Ryzen is 2666, anything higher is out of spec. The majority of people are able to reach that, but the odd person has to suffer.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k (won) - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

Linux Proliant ML150 G6:

Dual Xeon X5560 - 24GB ECC DDR3 - GTX 750 TI - old Seagate 1.5TB HDD - dark mode Ubuntu (and Win7, cuz why not)

 

How many watts do I need? Seasonic Focus thread, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, DVA said:

dumb question here, did you save it and restart the PC?...

If you didn't save it than it will return the stock speed of 2133

 

1 minute ago, Velcade said:

What?  Yes it is... When you buy a 3000MHz kit it should OC to 3000MHz.  Hell it might even OC to 36000MHz.

 

2 minutes ago, fasauceome said:

memory speed isn't guaranteed unfortunately. Can you manually OC to the listed speed and timings?

 

The computer not turn on, its beep 3x times and restart 3 times and go back to 2133mhz to show the screen.

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, HALKBR said:

Hello, i want help, i have bought 2x8 3000Mhz memory and its not working above 2133Mhz.

I already enabled D.O.C.P which turns 2933Mhz with custom timings and not worked.

 

Anyone can help me?

Id also ensure your BIOS revision is up to date

 

QVL was very important at release of that board...since then not so much.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 3: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler in push/pull, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  Lenovo 27" 1080p 60hz placeholder monitor, generic mouse, generic keyboard.  Still a work in progress

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Ryzen Rig 2: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Link to comment
Share on other sites

Link to post
Share on other sites

Can you give more details on your memory kit?  Is your BIOS up to date?

"And I'll be damned if I let myself trip from a lesser man's ledge"

Link to comment
Share on other sites

Link to post
Share on other sites

Try update the BIOS?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Velcade said:

Can you give more details on your memory kit?

 

1 minute ago, Tristerin said:

Id also ensure your BIOS revision is up to date

 

QVL was very important at release of that board...since then not so much.

 

Bios is updated.

 

Memory: CMW16GX4M2C3000

 

Its weird, because my old memory Hyperx Fury 8gb 2133Mhz i can set manually to 2666Mhz and works fine, but this new memory which i bought not works if i change the frequency.

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, HALKBR said:

 

 

Bios is updated.

 

Memory: CMW16GX4M2C3000

 

Its weird, because my old memory Hyperx Fury 8gb 2133Mhz i can set manually to 2666Mhz and works fine, but this new memory which i bought not works if i change the frequency.

Have you tried a manual overclock? 

 

Everything I am reading goes back to - this isn't supported by the QVL, nor by the chip so isn't guaranteed.  Also that this picture is important (dual/single channel etc) (maybe, Im new to overclocking my ram, haven't yet, reading a lot, but want to for my ryzen in sig)

 

 

1.jpg

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 3: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler in push/pull, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  Lenovo 27" 1080p 60hz placeholder monitor, generic mouse, generic keyboard.  Still a work in progress

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Ryzen Rig 2: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Link to comment
Share on other sites

Link to post
Share on other sites

16 minutes ago, Tristerin said:

Have you tried a manual overclock? 

 

Everything I am reading goes back to - this isn't supported by the QVL, nor by the chip so isn't guaranteed.  Also that this picture is important (dual/single channel etc) (maybe, Im new to overclocking my ram, haven't yet, reading a lot, but want to for my ryzen in sig)

 

 

1.jpg

 

Yes i tried timings 16-18-18-36 with 2933Mhz with no success.

 

Using 1.36 ~1.38V

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, HALKBR said:

 

Yes i tried timings 16-18-18-36 with 2933Mhz with no success.

 

Using 1.36 ~1.38V

Have you tried at 2667 MHz?

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 3: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler in push/pull, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  Lenovo 27" 1080p 60hz placeholder monitor, generic mouse, generic keyboard.  Still a work in progress

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Ryzen Rig 2: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Link to comment
Share on other sites

Link to post
Share on other sites

 

I have recorded what happens when i try to set the DOCP or set manually the frequency on bios.

 

The computer try to start 3x times and after that its starts which i shows on monitor, but its starts in 2133mhz :(

Link to comment
Share on other sites

Link to post
Share on other sites

6 hours ago, Tristerin said:

Have you tried at 2667 MHz?

Yes not worked

Link to comment
Share on other sites

Link to post
Share on other sites

Friends, today i've used Ryzen Calculator and used their timings and voltages.

 

Still same problem, im very disappointed with it.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×