Jump to content

No display signal, new build

rjbweb
By rjbweb
in Troubleshooting
 Share
Posted

Hi, just build a new system and I am having no display signal through hdmi.

Asus z270p, intel g3930, 500w PSU.

All fans and led lights work, hdd powers up and spins but no beep on boot and no signal ... It is driving me crazy, all MB connected as per manual and I have tested and replaced hdmi cable to exclude the obvious. Got CPU out of socket clean with alcohol and reaplyed thermal... PLS HELP.... I got a very unhappy 8 year old without Minecraft.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Have you tried using the monitor with another system?

CPU: AMD Ryzen 5 5600X | MOBO: MSI B450 Tomahawk GPU: AMD Radeon RX 6800XT | RAM: GSkill Trident Z DDR4 3600Mhz | PSU: ADATA Core Reactor 850W 80+ Gold | CASE: Fractal Design Meshify C MONITOR: LG 32UL500-W 4K 60Hz, Gigabyte M27Q 1440p 165Hz

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Does your motherboard have an HDMI port or anything of that sort? If the GPU is the problem, you may get a signal trough there. Take out the GPU, if the rest of the PC works you know what it is. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
31 minutes ago, rjbweb said:

Hi, just build a new system and I am having no display signal through hdmi.

Asus z270p, intel g3930, 500w PSU.

All fans and led lights work, hdd powers up and spins but no beep on boot and no signal ... It is driving me crazy, all MB connected as per manual and I have tested and replaced hdmi cable to exclude the obvious. Got CPU out of socket clean with alcohol and reaplyed thermal... PLS HELP.... I got a very unhappy 8 year old without Minecraft.

You didn't list if you are using the IGPU if so you may need to make a change in the bios I see your board has display port, DVI and HDMI it may not be set to the correct port that you are trying to connect to in the bios but you will need to try an adapter to get into the bios to change

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use Rig: OS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSD / EVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thank you for the replys, I haven't got a GPU, the monitor is actually a TV with hdmi, I haven't got a monitor or VGA cable, just the hdmi cable which I have said replaced. The TV works ok. 

No signal, no bios, no nothing. I have tried on another TV. I got speaker installed on the board and no beeps at all

15344441651001066771579.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I have also clear the coms ram thingy by taking the battery out and sorting the control pins on the motherboard.

it can only lol be MB, CPU or RAM... which I haven't got around spares to test out... 

4gb ddr4 2133Mhz by the way.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, rjbweb said:

I have also clear the coms ram thingy by taking the battery out and sorting the control pins on the motherboard.

it can only lol be MB, CPU or RAM... which I haven't got around spares to test out... 

4gb ddr4 2133Mhz by the way.

Ok but you still have not ruled out that the signal is going to one of the other ports by default, here take a look at this:

https://smallbusiness.chron.com/switch-onboard-gpu-asus-53059.html

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use Rig: OS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSD / EVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
28 minutes ago, mrbilky said:

Ok but you still have not ruled out that the signal is going to one of the other ports by default, here take a look at this:

https://smallbusiness.chron.com/switch-onboard-gpu-asus-53059.html

That doesn't help, as I said, there is not signal to the display. I can't change any setting on bios.

thanks the same.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try unplugging and replugging your main power cable, I've had the same issue, it wasn't plugged all the way

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, DanSlice said:

try unplugging and replugging your main power cable, I've had the same issue, it wasn't plugged all the way

I have done several times, including rebuilding the whole pc twice.

thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, rjbweb said:

That doesn't help, as I said, there is not signal to the display. I can't change any setting on bios.

thanks the same.

Ok? but realize it won't be the boards fault if that's the case you will need to confirm one of the other ports is active and boot into the bios from that port that will require a different cable or adapter but good luck either way

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use Rig: OS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSD / EVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I tested my PSU with a multimeter and all Voltages are correct. one thing less that could be the culprit in my troubleshooting.

motherboard, CPU and RAM are still to be confirmed since I haven't got replacements to check.

thank you all for all of your advices, I understand that it is hard to give advice in problems like this.

 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 3 weeks later...
Posted
  • Author

Just an update. (Sorry for delay been on hols)

Unfortunately, my system still not working.

I have tried to update the MB from USB but noticed that no I\O port seems to have power or not working. Keyboard or mouse no lights. Even tried installing with the box front USBs and not power. Tried a DVI adaptor to hdmi and DVI port still not work... I am gonna have to bite the bullet and take it to a shop and pay to troubleshoot.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You need a special HDMI cable to get signal from the TV. (IDK if you did that.)

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author
On 05/09/2018 at 1:06 PM, DOGEY said:

You need a special HDMI cable to get signal from the TV. (IDK if you did that.)

 

 

no sure what you trying to say but, no you don't. is a common HDMI cable that works perfect with other devices... 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 months later...
Posted
  • Author

Just to let you all know that in the end it was a bad Ram stick... 

changed the RAM stick and booted straight away... 

That is the problem when you get the latest tech and you don't have spares to test and troubleshoot... 

Thank you all.

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×