Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
AAura

GPU Locked At 1817Mhz With Adobe AE Running

Recommended Posts

Posted · Original PosterOP

I'm not sure if this is normal but when i try and do a preview/render on Adobe AE, with a very minial load, why do i get such an insane GPU frequency? The utilisation is low and the profile i'm using is the default one from a fresh DDU and Driver install/uninstall. Is this safe and just some weird bug?

Weird.thumb.png.1f87e29c34be72052add92e4a88c91de.png

Link to post
Share on other sites

It's probably normal while the software may quarry the GPU.

 

You could use GPU-Z and look at the sensors tab. Near the bottom, there's a listing for "PerfCap Reason" This will tell you the GPU state.

 

vRel = Reliability. Indicating performance is limited by voltage reliability.
VOp = Operating. Indicating performance is limited by max operating voltage(Hardware Limit).
Pwr = Power. Indicating performance is limited by total power limit.
Thrm = Thermal. Indicating performance is limited by temperature limit.
Util = Utilization. Indicating performance is limited by GPU utilization.
Idle = Idle low power states.

 

Hope this helps, if not right now, perhaps in the future.


 

Lid-less PGA 2700x / ROG B450-I Gaming / G.Skill 3600mhz B-Die / GTX 980 bmod / Antec 850w CP series

Lid-less 8700K / Maximus X Hero / G.Skill 4266mhz B-Die / VGA any benching rig / Antec 1000w CP series

Ryzen 5 1400 / Asus Prime A320M-K / Corsair LPX 3000mhz / GTX-980 Bios modded / EVGA 750 / HTPC

Ryzen Athlon 220ge with Vega Graphics / Asus Prime B450M-A / Corsair LED 3000mhz / 550w Antec Office PC.

DFI LanParty UT / 4000+ ClawHammer / DDR Corsair XMS Expert / X1800 XT 256MB Bios modded

Asus CrossHair Formula IV / Phenom II x4 B97 / Dominator GT 2000mhz. / EVGA GTX 770

Link to post
Share on other sites

Don’t see the frequency being insane. Doesn’t really mean much compared to load. 


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080TI SC Black, EVGA 850 GQ, Acer xG270HU 2560x1440@144hz

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1080sc & 1060 SSC, Corsair CX850M, Acer KG251Q 1920x1080@240hz 

 

Link to post
Share on other sites

How is that insane? The jump in clocks is just to prepare for a coming workload, usually if it lasts for a bit of time it will come down


CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
4 minutes ago, Jurrunio said:

How is that insane? The jump in clocks is just to prepare for a coming workload, usually if it lasts for a bit of time it will come down

 

6 minutes ago, Mick Naughty said:

Don’t see the frequency being insane. Doesn’t really mean much compared to load. 

I don't understand how the clocks work, all i see is 1817Mhz on an unstable Vega 64 LC which normally clocks between 1655Mhz - 1782Mhz under 100% load.

Link to post
Share on other sites
Posted · Original PosterOP
9 minutes ago, ShrimpBrime said:

It's probably normal while the software may quarry the GPU.

 

You could use GPU-Z and look at the sensors tab. Near the bottom, there's a listing for "PerfCap Reason" This will tell you the GPU state.

 

vRel = Reliability. Indicating performance is limited by voltage reliability.
VOp = Operating. Indicating performance is limited by max operating voltage(Hardware Limit).
Pwr = Power. Indicating performance is limited by total power limit.
Thrm = Thermal. Indicating performance is limited by temperature limit.
Util = Utilization. Indicating performance is limited by GPU utilization.
Idle = Idle low power states.

 

Hope this helps, if not right now, perhaps in the future.

I'll try this later because the download links on Techpowerup are dead rn

Link to post
Share on other sites
2 minutes ago, AAura said:

 

I don't understand how the clocks work, all i see is 1817Mhz on an unstable Vega 64 LC which normally clocks between 1655Mhz - 1782Mhz under 100% load.

it can boost higher when cold and current draw is low


CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Worked ok for me.

 

Here it is for you.

GPU-Z.2.29.0 (1).exe


 

Lid-less PGA 2700x / ROG B450-I Gaming / G.Skill 3600mhz B-Die / GTX 980 bmod / Antec 850w CP series

Lid-less 8700K / Maximus X Hero / G.Skill 4266mhz B-Die / VGA any benching rig / Antec 1000w CP series

Ryzen 5 1400 / Asus Prime A320M-K / Corsair LPX 3000mhz / GTX-980 Bios modded / EVGA 750 / HTPC

Ryzen Athlon 220ge with Vega Graphics / Asus Prime B450M-A / Corsair LED 3000mhz / 550w Antec Office PC.

DFI LanParty UT / 4000+ ClawHammer / DDR Corsair XMS Expert / X1800 XT 256MB Bios modded

Asus CrossHair Formula IV / Phenom II x4 B97 / Dominator GT 2000mhz. / EVGA GTX 770

Link to post
Share on other sites

My GTX1070 sits at my OC clocks (2025Mhz Core and Ram is clocked up too) when rendering/encoding, while my GPU usage is variable but low at 5-30% maybe....
Preparation and all that... it wants to do the work as fast as possible, clocks high, even with limited usage, its still as fast as it can be.


Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×