Jump to content

Andooo

Member
 View Profile  See their activity

  • Posts

    111

  • Joined

  • Last visited

Reputation Activity

  1. Like
    Andooo
    Andooo reacted to PcBeExpensive in Z790 Motherboard and RAM for 13600k   
    4800 is without XMP. If its on the memory support list that means XMP can be enabled and it will run fine. You could probably overclock the RAM too, just make sure you stay inside the numbers that you CPU and MOBO can handle
  2. Like
    Andooo
    Andooo reacted to Ebony Falcon in Z790 Motherboard and RAM for 13600k   
    I went for a z790 tomahawk and ddr4 tuned samsung b die for gaming 
  3. Like
    Andooo
    Andooo reacted to TylerD321 in Z790 Motherboard and RAM for 13600k   
    I believe the general recommendation for DDR5 is 6000 mhz.
  4. Like
    Andooo
    Andooo reacted to ThatOneRussian in Barbed vs Compression   
    im so confused......
    i may have to rethink my build lol
    so you put one half of this into the block, and then put the tubing inside the fitting into the other side?
    https://shop.ekwb.com/ek-acf-fitting-10-13mm-red
     
    edit : NVM THANK YOU !!!!!!!!!
  5. Like
    ThatOneRussian
    Andooo got a reaction from ThatOneRussian in Barbed vs Compression   
    So 
     
    The threaded side goes into your pump/block/rad/reservoir and then the other end is also threaded but it has a barb which you insert into your tube. You then place the clamp over your tube and onto the thread which creates a seal by squeezing your tube between it and the barb. http://img.gawkerassets.com/post/17/2012/09/d_4679.jpg . That image may help.
  6. Like
    JebKerman
    Andooo got a reaction from JebKerman in Barbed vs Compression   
    So 
     
    The threaded side goes into your pump/block/rad/reservoir and then the other end is also threaded but it has a barb which you insert into your tube. You then place the clamp over your tube and onto the thread which creates a seal by squeezing your tube between it and the barb. http://img.gawkerassets.com/post/17/2012/09/d_4679.jpg . That image may help.
  7. Like
    airdeano
    Andooo got a reaction from airdeano in EK-DCP 2.2 Pump sufficient?   
    Thanks
  8. Like
    Andooo
    Andooo reacted to Peter Vaughan Truslow in Pentium Anniversary + Motherboard   
    I should add that I did 4.5 ghz on the stock intel heatsink, so it could probably do more with an aftermarket cooler.
  9. Like
    Andooo
    Andooo reacted to i_build_nanosuits in Good mobo for I5-4690k   
    MSI Z97 Gaming 5 and MSI Z97-G45 gaming are very good motherboards for the price:
     
    http://www.msi.com/product/mb/Z97-GAMING-5.html
     
    http://www.msi.com/product/mb/Z97-G45-GAMING.html#hero-overview
     
    The gaming 5 looks better but both boards share the same features.
    You can buy a matching GPU to go along if you feel it!
     
    Both supports SLI, if you have absolutely no intention of ever running 2 graphics cards you can even look at the MSI Z97 Gaming 3 or Z97-G43 Gaming
     
    Here are the specs for all the Z97 models
    http://game.msi.com/product/motherboard/z97-gaming/models
  10. Like
    Andooo
    Andooo reacted to DudeWazap in Which Z97 motherboard should i get?   
    I'm sorry I accidentally over looked the part where you said "nicest looking yet cheapest". That's my fault.
  11. Like
    Andooo
    Andooo reacted to harrynowl in Best CPU to pair with my GTX 970   
    Why? Nothing I've said is false. If a situation calls for FX I'll recommend FX. If an Intel CPU makes more sense I'll recommend that.
     
    The only biased person would be is someone recommending something unsuitable.
     
    And I've not gone "fx is crap only idiots buy lol get intel".
     
    If you're just here to call someone biased/a fanboy and not back yourself up then you're not contributing any more than a fanboy comment.
×