Jump to content

Wattage not changing at %100 load

Matriox
By Matriox
in CPUs, Motherboards, and Memory
 Share
Posted

So i'm doing overclocking tests when i noticed my cpu says it's only pulling "2.2Watts" which i know is literally impossible at a full load so what is this? and how can i fix it?

post-81567-0-41541200-1422682051.png

post-81567-0-41541200-1422682051.png

CPU¤Core i5 5675c ¤Cooler¤Ghetto water loop(Cheap tubing & block from amazon)¤GPU1¤Sapphire R9 290x Tri-x¤MOBO¤Asrock H97m Anniversary ¤RAM¤8GB DDR3 1866Mhz¤Storage¤2Tb SSHD & 320Gb HDD¤Case¤Cougar Spike Mini ITX case¤PowerSupply¤500w EVGA 80 plus¤

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Cross-check with other monitoring software for now...

 

Are you experiencing any blue screens??

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

just use core temp to monitor temps, thats it

 

if your scoring 10.29 in cinebench  @ 4.7ghz ..trust me your wattage is increasing under load.

Mainboard Asrock Z170 OCF CPU 6700k RAM Tridentz 3600 HDD Intel 730 240gb GPU GTX 780ti sc acx PSU Silverstone Strider 1200W  Case Antec 900 Laptop Lenovo Thinkpad T520 build log-   http://linustechtips.com/main/topic/35809-antec-900-the-re-birth-of-a-legend/ Check out the Tech Center https://www.youtube.com/user/prokon24/videos LTT's Unicore King

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Cross-check with other monitoring software for now...

 

Are you experiencing any blue screens??

Even while benchmarking aida extreme shows only a max of 2.2w

CPU¤Core i5 5675c ¤Cooler¤Ghetto water loop(Cheap tubing & block from amazon)¤GPU1¤Sapphire R9 290x Tri-x¤MOBO¤Asrock H97m Anniversary ¤RAM¤8GB DDR3 1866Mhz¤Storage¤2Tb SSHD & 320Gb HDD¤Case¤Cougar Spike Mini ITX case¤PowerSupply¤500w EVGA 80 plus¤

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Even while benchmarking aida extreme shows only a max of 2.2w

 

I think the problem is with CoreTemp... Try monitoring with HWMonitor or Aida64 and compare...

 

If there are no blue screens in load scenarios, you should be fine...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I think the problem is with CoreTemp... Try monitoring with HWMonitor or Aida64 and compare...

 

If there are no blue screens in load scenarios, you should be fine...

aida64 stills shows the same

CPU¤Core i5 5675c ¤Cooler¤Ghetto water loop(Cheap tubing & block from amazon)¤GPU1¤Sapphire R9 290x Tri-x¤MOBO¤Asrock H97m Anniversary ¤RAM¤8GB DDR3 1866Mhz¤Storage¤2Tb SSHD & 320Gb HDD¤Case¤Cougar Spike Mini ITX case¤PowerSupply¤500w EVGA 80 plus¤

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

aida64 stills shows the same

 

weird... next step would be measuring the system's power draw with a Kill-a-Watt to see if the sensor on the mobo/CPU is faulty...

 

I'd suggest not minding it too much if there are no problems with the system...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×