Please Help

[Dakesy3211]

coulkd someone please help me. i boot my PC up perfectly fine then about 10 mins into it been turned on it sometimes just black screens and the when i restart it i get a overclocking failed boot page... i have not overclocked the pc and i have reset the bios and cmos. what else can i do.

 

Thanks a lot 

[Zipfire]

stop overclocking and see if it still happens

 

[Dakesy3211]

1 minute ago, Zipfirealpha said:

stop overclocking and see if it still happens

 

its not overclocked at all i have reset it all

[Brooksie359]

33 minutes ago, Dakesy3211 said:

its not overclocked at all i have reset it all

What cpu? Did you double check that voltage and core clock are on auto? Also make sure your memory is running at the lowest standard for its memory type such as 2133 for ddr4. 

[bebejapes]

are all the components plugged in correctly. it might be a wrong seating soemthere

[AskTJ]

Cooler applied correctly? System specs? Temps?

[Dakesy3211]

the only thing that i havent checked is if the ram is seated propperly so i will try that now other than that all the other comments i have done or are running perfectly

thanks for the replys

[Dakesy3211]

as for specs

    Intel Core i7 5930K @ 3.50GHz    27 °C
    Haswell-E/EP 22nm Technology
RAM
    16.0GB Unknown @ 1065MHz (15-15-15-35)
Motherboard
    ASUSTeK COMPUTER INC. X99-A (SOCKET 2011)    23 °C
Graphics
    BenQ XL2411Z (1920x1080@144Hz)
    S236HL (1920x1080@60Hz)
    SMS19A200 (1440x900@60Hz)
    4095MB NVIDIA GeForce GTX 1070 (EVGA)    37 °C
Storage
    2794GB Seagate ST3000DM001-1CH166 (SATA )    23 °C
    476GB Samsung SSD 850 PRO 512GB (SATA (SSD))

[bebejapes]

23 hours ago, Dakesy3211 said:

as for specs

    Intel Core i7 5930K @ 3.50GHz    27 °C
    Haswell-E/EP 22nm Technology
RAM
    16.0GB Unknown @ 1065MHz (15-15-15-35)
Motherboard
    ASUSTeK COMPUTER INC. X99-A (SOCKET 2011)    23 °C
Graphics
    BenQ XL2411Z (1920x1080@144Hz)
    S236HL (1920x1080@60Hz)
    SMS19A200 (1440x900@60Hz)
    4095MB NVIDIA GeForce GTX 1070 (EVGA)    37 °C
Storage
    2794GB Seagate ST3000DM001-1CH166 (SATA )    23 °C
    476GB Samsung SSD 850 PRO 512GB (SATA (SSD))

why does the ram show up as unknown?

after reseating the other equipment did it crash?

i know this may sound stupid, but was the thermal paste applied properly and was the safety sticker taken off the aluminum/copper plate?

[Dakesy3211]

9 hours ago, bebejapes said:

why does the ram show up as unknown?

after reseating the other equipment did it crash?

i know this may sound stupid, but was the thermal paste applied properly and was the safety sticker taken off the aluminum/copper plate?

i dont know hwy it shows up unknown, i havent changed anything and it has been running perfectly fine for the past couple of days now. and yeah thermal paste and everything is applied properly only thing i can think of at this stage is a dodgey stick of ram