Jump to content

How do I overclock my Inno3D Ichill X3 1080TI with MSI afterburner? (With screenshot)

ImInHugeTrouble
By ImInHugeTrouble
in Graphics Cards
 Share
Posted

Hi just bought NZXT X62 for my 1080TI and im very newbie with this overclocking stuff, how do I overclcok my card? I want it to be as powerful as it could.

asdasdasd.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

1. unlock the voltage monitoring in the options menu

 

2. Set a fan curve you'd want (you can change this at all times if you dont like it)

 

3. follow instructions in this post

https://linustechtips.com/main/topic/908480-gtx-1070-voltagefrequency-curve/

but instead of stopping at a specific frequency, you just keep on going until the voltage reaches 1.09V or before that when the card stops raising the voltage.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
51 minutes ago, Jurrunio said:

1. unlock the voltage monitoring in the options menu

 

2. Set a fan curve you'd want (you can change this at all times if you dont like it)

 

3. follow instructions in this post

https://linustechtips.com/main/topic/908480-gtx-1070-voltagefrequency-curve/

but instead of stopping at a specific frequency, you just keep on going until the voltage reaches 1.09V or before that when the card stops raising the voltage.

Is this okay or is this could go further?

asdasdasd.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Lol, you're fine.  It crashes to save itself.  it's not meant to go to 2088MHz like that.  Keep reducing your +clock speeds til you're stable, then do with memory clocks too.

 

You'll find the sweet spot in a bit.

 

I don't mess with voltage at all, personally.  I up the Max temp and power limits, add some clock and mem OC and let her rip.  She runs between 1975 and 2025 depending on game.  Plenty for me.

"Do what makes the experience better" - in regards to PCs and Life itself.

 

Onyx : AMD Ryzen 7 7800x3d / MSI 6900xt Gaming X Trio / Gigabyte B650 AORUS Pro AX / G. Skill Flare X5 6000CL36 32GB / Samsung 980 1TB x3 / Super Flower Leadex V Platinum Pro 850 / EK-AIO 360 Basic / Fractal Design North XL (black mesh) / AOC AGON 35" 3440x1440 100Hz / Mackie CR5BT / Corsair Virtuoso SE / Cherry MX Board 3.0 / Logitech G502

 

7800X3D - PBO -30 all cores, 4.90GHz all core, 5.05GHz single core, 18286 C23 multi, 1779 C23 single

 

Emma : i9 9900K @5.1Ghz - Gigabyte AORUS 1080Ti - Gigabyte AORUS Z370 Gaming 5 - G. Skill Ripjaws V 32GB 3200CL16 - 750 EVO 512GB + 2x 860 EVO 1TB (RAID0) - EVGA SuperNova 650 P2 - Thermaltake Water 3.0 Ultimate 360mm - Fractal Design Define R6 - TP-Link AC1900 PCIe Wifi

 

Raven: AMD Ryzen 5 5600x3d - ASRock B550M Pro4 - G. Skill Ripjaws V 16GB 3200Mhz - XFX Radeon RX6650XT - Samsung 980 1TB + Crucial MX500 1TB - TP-Link AC600 USB Wifi - Gigabyte GP-P450B PSU -  Cooler Master MasterBox Q300L -  Samsung 27" 1080p

 

Plex : AMD Ryzen 5 5600 - Gigabyte B550M AORUS Elite AX - G. Skill Ripjaws V 16GB 2400Mhz - MSI 1050Ti 4GB - Crucial P3 Plus 500GB + WD Red NAS 4TBx2 - TP-Link AC1200 PCIe Wifi - EVGA SuperNova 650 P2 - ASUS Prime AP201 - Spectre 24" 1080p

 

Steam Deck 512GB OLED

 

OnePlus: 

OnePlus 11 5G - 16GB RAM, 256GB NAND, Eternal Green

OnePlus Buds Pro 2 - Eternal Green

 

Other Tech:

- 2021 Volvo S60 Recharge T8 Polestar Engineered - 415hp/495tq 2.0L 4cyl. turbocharged, supercharged and electrified.

- Lenovo 720S Touch 15.6" - i7 7700HQ, 16GB RAM 2400MHz, 512GB NVMe SSD, 1050Ti, 4K touchscreen

- MSI GF62 15.6" - i7 7700HQ, 16GB RAM 2400 MHz, 256GB NVMe SSD + 1TB 7200rpm HDD, 1050Ti

- Ubiquiti Amplifi HD mesh wifi

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, ImInHugeTrouble said:

Is this okay or is this could go further?

asdasdasd.png

I forgot to mention, DONT USE KOMBUSTOR!. Kombustor is a Furmark equivalent, while it does stress the GPU hard it doesnt represent overclock stability in gaming.

 

Best way is to use a very GPU-heavy game with the graphics options and resolution scaling pushed as high as possible as a stress test tool.

 

Did you use the voltage/frequency graph?

 

Also you can crank the power limit all the way up.

 

2 minutes ago, ImInHugeTrouble said:

Very dissapointing with my NZXT kraken x62, can't even get over+120 like others :( 

CPU cooler doesnt affect GPU overclocking unless the case airflow is garbage.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×