Jump to content

CPU underclocking itself

speedricky54
 Share
Posted

SPECS: Intel i7 6700k,

NZXT Kraken X52

MSI M5 Z170 (newest BIOS update v1l

MSI GTX 1060

Corsair RM750X PSU

Corsair Vengeance 16GB

Windows 10 64bit


I've only had this issue once before and it fixed itself after a restart. This incident started happening after I purchased a Gsync monitor (this one specifically). The CPU underclocks itself periodically usually for 2 minutes and then goes back to normal, than happens again within the next 5 minutes. The CPU underclocks itself when an led at the bottom of my motherboard turns on.. The red led is right next to a 'Slow' switch which is disabled and has been disabled. So i'm presuming it's a motherboard problem.

Here are some pictures and screenshots, if anyone has a fix please tell me.

image.png.56817a66d8cc431f0935b2d8dd7e8b4b.png

image.png.d4802079e643f87c122de881a871625a.png

 

Link to comment
https://linustechtips.com/topic/958433-cpu-underclocking-itself/
Share on other sites
Link to post
Share on other sites
Posted

sounds like C-state doing its work to save power...

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted

This happens on every CPU sold today for consumers.
It's old name was Speedstep.

Then other power saving technical names came to be...

 

Turning it off or on...in WIndows 10, not sure,.. likely there is a tool for it online.
Pre-Windows 10,...You go to Control Panel (Old one) and go to Power profiles, advanced options and in (usually, always is for me) there is a list of expandable options...
A CPU Min and a CPU Max for on AC <- or Battery (0-100%, you set the Min to 100%)


Bios wise...
You can read your motherboard manual, look it up online via Youtube videos, other forum posts and such...
The info isn't that hard to grab for most manufacturers of motherboards.

 

PWR.png

Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to post
Share on other sites
Posted

Does it underclock aggressively enough to cause stuttering though?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted

You 100% have speedstep enabled, look for Speedstep or EIST in UEFI and disable it.

 

In Windows open Control Panel > Power then switch to the High Performance profile.

 

Doing both these things should resolve your issue.

Main Rig:-

Ryzen 7 3800X | Asus ROG Strix X570-F Gaming | 16GB Team Group Dark Pro 3600Mhz | Corsair MP600 1TB PCIe Gen 4 | Sapphire 5700 XT Pulse | Corsair H115i Platinum | WD Black 1TB | WD Green 4TB | EVGA SuperNOVA G3 650W | Asus TUF GT501 | Samsung C27HG70 1440p 144hz HDR FreeSync 2 | Ubuntu 20.04.2 LTS |

 

Server:-

Intel NUC running Server 2019 + Synology DSM218+ with 2 x 4TB Toshiba NAS Ready HDDs (RAID0)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×