Handbrake error message.

[ice856]

So i just finished encoding a video with handbrake but it shows "que finished with error or cancelation" how do i know what kind of error that happened with the encoding process??

[NelizMastr]

Like most software, handbrake probably has log files. Look for the log file, open it up with notepad/wordpad and see what happened  

[LogicalDrm]

There's log available in Queue window.

[ice856]

On 7/5/2018 at 6:41 PM, NelizMastr said:

Like most software, handbrake probably has log files. Look for the log file, open it up with notepad/wordpad and see what happened  

 

On 7/6/2018 at 3:16 PM, LoGiCalDrm said:

There's log available in Queue window.

I did open the log but i still dont understand. The log only show the video encoding process.

[LogicalDrm]

5 hours ago, ice856 said:

 

I did open the log but i still dont understand. The log only show the video encoding process.

Paste it here with spoiler and code tags. Or you can try with Handbrake's  own support forum.

[ice856]

On 7/9/2018 at 9:45 AM, LoGiCalDrm said:

Paste it here with spoiler and code tags. Or you can try with Handbrake's  own support forum.

I finally found the error by comparing with other video log file and here it is and the error is consistent with all of the problematic video

 

av_read_frame error (-1052488119): Invalid data found when processing input
av_read_frame error (-1052488119): Invalid data found when processing input
[08:07:55] Warning: Could not read data for preview 10, skipped

 

 

[LogicalDrm]

5 hours ago, ice856 said:

I finally found the error by comparing with other video log file and here it is and the error is consistent with all of the problematic video

 

av_read_frame error (-1052488119): Invalid data found when processing input
av_read_frame error (-1052488119): Invalid data found when processing input
[08:07:55] Warning: Could not read data for preview 10, skipped

 

 

So this is happening to multiple giles? Are they from same source and/or on samr drive/partition?

[ice856]

1 hour ago, LoGiCalDrm said:

So this is happening to multiple giles? Are they from same source and/or on samr drive/partition?

yes some of the video experience this problem and yes all of them from the same drive

[LogicalDrm]

1 hour ago, ice856 said:

yes some of the video experience this problem and yes all of them from the same drive

As the error says the issue is with input file, I'd say that drive is your issue. I don't know if it's bad sector or is it powering off while process is running or is it even going bad. But seems like drive is at fault here. You can check it by moving problem files to another drive and trying again.

[ice856]

17 hours ago, LoGiCalDrm said:

As the error says the issue is with input file, I'd say that drive is your issue. I don't know if it's bad sector or is it powering off while process is running or is it even going bad. But seems like drive is at fault here. You can check it by moving problem files to another drive and trying again.

Ok i will try to move the file and encode it again

[ice856]

I try to encode the same file multiple time and some how the error is gone. It seems its a bug from handbrake