Jump to content

UserBenchmark Test SSD Check failure

Anastasios
 Share
Go to solution Solved by Jurrunio,
1 minute ago, Anastasios said:

 

I used CrystalDiskMark 6 but I don't know what the indication number mean. I am mostly concerned about the proper operation of the hardware that's all

then use crystaldiskinfo. It will show storage drive health through checking error codes that could come up.

Posted

Hi there,

 

I did a benchmark test with the UserBenchMark.exe and a couple of weeks ago I got outstanding results (Image 1).

 

 

image.png.094a6a55827e0f2523f106a30563ca98.png

 

However, I check that there was an updated version just a few days ago and I did another one to check as the power was cut off, just to make sure that everything is working fine. Then I got this result...

(Image 2)

image.png.c712f437cd0b2b4ed4ff88a779844b5e.png

After having a closer look I saw that there is a problem with the ssd readings...(Image 3)

image.png.5c66fb75a96fb33b1b476baa60f7531f.png

 

Anyone has any idea as to what may have happen?

 

Thanks in advance guys!

 

Link to comment
https://linustechtips.com/topic/943393-userbenchmark-test-ssd-check-failure/
Share on other sites
Link to post
Share on other sites
Posted

Don't use userbenchmark.

Use proper tools like crystaldiskinfo and crystaldiskmark.

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites
Posted

wrong tools for the job. Use disk check apps rather than systen benchmark apps for this.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
58 minutes ago, Enderman said:

Don't use userbenchmark.

Use proper tools like crystaldiskinfo and crystaldiskmark.

 

32 minutes ago, Jurrunio said:

wrong tools for the job. Use disk check apps rather than systen benchmark apps for this.

I used CrystalDiskMark 6 but I don't know what the indication number mean. I am mostly concerned about the proper operation of the hardware that's all

Link to post
Share on other sites
Posted
  • Solution
1 minute ago, Anastasios said:

 

I used CrystalDiskMark 6 but I don't know what the indication number mean. I am mostly concerned about the proper operation of the hardware that's all

then use crystaldiskinfo. It will show storage drive health through checking error codes that could come up.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Programs, Apps and Websites

×