Jump to content

Socket replacement

Go to solution Solved by asand1,

 

Hi, 

   I knowingly broke my pins of my motherboard, now that I realize what i have done  i need to fix it. But i have a doubt, can i use a kabylake replacement socket on a coffee lake motherboard??

 

Thank you

IMG_20180530_085212_310.JPG

Link to comment
Share on other sites

Link to post
Share on other sites

Firstly. Do you have the means to melt over 1000 solder joints simultaneously with enough heat control as to not melt the plastic part of the socket?

Link to comment
Share on other sites

Link to post
Share on other sites

You can either fix the pins, or buy a new mobo

CPU: i7 3820@4.3Ghz GPU: Gtx 1060 RAM: 16gb HyperX Fury CASE: S340 Elite Cpu runs nice and hot ( ͡° ͜ʖ ͡°)

Link to comment
Share on other sites

Link to post
Share on other sites

It's not worth even trying to fix it. Sell it for parts and buy a new mobo.

Intel Core i9-10900X, Asus TUF X299 Mark 1, 64GB DDR4 3200MHz, Asus GTX 1080 Strix, 2TB 970 EVO Plus, 2TB SN570, 8TB HDD, DC Assassin III, Meshify 2

Old PC: Intel Xeon X5670 6c/12t @ 4.40GHz, Asus P6X58D-E, 24GB DDR3 1600MHz, Asus GTX 1080 Strix, 500GB, 250GB & 120GB SSD, 2x 4TB & 2x 2TB HDD, Fractal Define R5

PC 2: Intel Xeon E5-2690 8c/16t @ 3.3-3.8GHz, ThinkStation S30 (C602/X79), 64GB (4x 16GB) DDR3 1600MHz, Asus GeForce GTX 960 Turbo OC, 1TB Crucial MX500

PC 3: Intel Core i7-3770 4c/8t @ 4.22-4.43GHz, Asus P8Z77-V LK, 16GB DDR3 1648MHz, Asus RX 470 Strix, 1TB & 250GB Crucial MX500 and 3x 500GB HDD

Laptop: ThinkPad T440p, Intel Core i7-4800MQ 4c/8t @ 2.7-3.7GHz, 16GB DDR3 1600MHz, GeForce GT 730M (GPU: 1006MHz MEM: 1151MHz), 2TB SSD, 14" 1080p IPS, 100Wh battery

Laptop 2: ThinkPad T450, Intel Core i7-5600U 2c/4t @ 2.6-3.2GHz, 16GB DDR3 1600MHz, Intel HD 5500, 250GB SSD, 14" 900p TN, 24Wh + 72Wh batteries

Phone: Huawei Honor 9 64GB + 256GB card Watch: Motorola Moto 360 1st Gen.

General X58 Xeon/i7 discussion

Some other PC's:

Spoiler

Some of the specs of these systems might not be up to date

PC 4: Intel Xeon X5675 6c/12t @ 3.07-3.47GHz, HP 0B4Ch (X58), 12GB DDR3 1333MHz, Asus GeForce GTX 660 DC2, 240GB & 120GB SSD, 1TB HDD

PC 5: Intel Xeon W3550 @ 3.07GHz, HP (X58), 8GB DDR3, NVIDIA GeForce GT 640 (GPU: 1050MHz MEM: 1250MHz), 120GB SSD, 2TB, 1TB and 500GB HDD

PC 6: Intel Core2 Quad Q9550 @ 3.8GHz, Asus P5KC, 8GB DDR2, NVIDIA GeForce GTX 470, 120GB SSD and 500GB HDD

HTPC: Intel Core2 Quad Q6600 @ 3.0GHz, HP DC7900SFF, 8GB DDR2 800MHz, Asus Radeon HD 6570, 240GB SSD and 3TB HDD

WinXP PC: Intel Core2 Duo E6300 @ 2.33GHz, Asus P5B, 2GB DDR2 667MHz, NVIDIA GeForce 8500 GT, 32GB SSD and 80GB HDD

RetroPC: Intel Pentium 4 HT @ 3.0GHz, Gigabyte GA-8SGXLFS, 2gb DDR1, ATi Radeon 9800 Pro, 2x 40gb HDD

My first PC: Intel Celeron 333MHz, Diamond Micronics C400, 384mb RAM, Diamond Viper V550 (NVIDIA Riva TNT), 6gb and 8gb HDD

Server: 2x Intel Xeon E5420, Dell PowerEdge 2950, 32gb DDR2, ATI ES1000, 4x 146gb SAS

Dual Opteron PC: 2x 6-core AMD Opteron 2419EE, HP XW9400, 32GB DDR2, ATI Radeon 3650, 500gb HDD

Core2 Duo PC: Intel Core2 Duo E8400, HP DC7800, 4gb DDR2, NVIDIA Quadro FX1700, 1tb and 80gb HDD

Athlon XP PC: AMD Athlon XP 2400+, MSI something, 1,5gb DDR1, ATI Radeon 9200, 40gb HDD

Thinkpad: Intel Core2 Duo T7200, Lenovo Thinkpad T60, 4gb DDR2, ATI Mobility Radeon X1400, 1tb HDD

Pentium 3 PC: Intel Pentium 3 866MHz, Asus CUSL2-C, 512mb RAM, 3DFX VooDoo 3 2000 AGP

Laptop: Dell Latitude E6430, Intel Core i5-3210M, 6gb DDR3 1600MHz , Intel HD 4000, 250gb Samsung SSD 860 EVO, 1TB WD Blue HDD

Laptop: Latitude 3380, Intel Pentium Gold 4415U 2c/4t @ 2.3GHz, 8GB DDR4, Intel HD 610, 120GB SSD, 13.3" 768p TN, 56Wh battery

 

Link to comment
Share on other sites

Link to post
Share on other sites

I get  that. it's hard but i am not going to give away the possibility that I Can have a completely working board if i would succeed, about heating  i was thinking about blowing hot air through a hole in the circuit using a blow gun, it's ok if fall, but it would be cool if it works, but i just have a doubt, is the physical structure of kabylake socket the same as coffee lake, i know that pin's work interpretation is different from  kabylake but it is still a lga "1151" even though they added a "v2". 

Link to comment
Share on other sites

Link to post
Share on other sites

Should be the same physical socket. Worth a try if you have some soldering/heat gun experience.

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

Thank you, that is what i wanted to hear,  now i am going togive it a try!!!! 

Link to comment
Share on other sites

Link to post
Share on other sites

 

Black Knight-

Ryzen 5 5600, GIGABYTE B550M DS3H, 16Gb Corsair Vengeance LPX 3000mhz, Asrock RX 6800 XT Phantom Gaming,

Seasonic Focus GM 750, Samsung EVO 860 EVO SSD M.2, Intel 660p Series M.2 2280 1TB PCIe NVMe, Linux Mint 20.2 Cinnamon

 

Daughter's Rig;

MSI B450 A Pro, Ryzen 5 3600x, 16GB Corsair Vengeance LPX 3000mhz, Silicon Power A55 512GB SSD, Gigabyte RX 5700 Gaming OC, Corsair CX430

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, lionsland said:

You can either fix the pins, or buy a new mobo

Ex

 

3 hours ago, Praxis727 said:

not gonna fix the pins.  New mobo it is for sure.

Believe it or not i am all in for this, I can't scrap a brand new board just because I messed you or sell it to someone knowing that it will be a waste of money for him. 

Link to comment
Share on other sites

Link to post
Share on other sites

22 hours ago, SpiralTTGL said:

That's completely fucked new mobo it is

I couldn't agree more!!!! 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×