Unable to BOOT windows on asus rog strix b350-f gaming

[YungYottis]

Hey guys so yesterday I finally bought the parts I wanted to build a pc and after I built it and after I created a bootable Windows usb with rufus I went to the bios and plugged the usb onto my pc.I selected it and clicked it and it started loading for a little bit but then nothing happened and it put me back to the bios.Ive tried many times but nothing happened any solutions anyone? Cpu:Ryzen 5 2600 mono:asus rog strix b350-f gaming 

[themctipers]

try reflashing the USB with windows ISO
sometimes the flashing is broke and you have to reflash

[Guest]

6 minutes ago, themctipers said:

try reflashing the USB with windows ISO
sometimes the flashing is broke and you have to reflash

He needs a bios update for that mobo to support that cpu.

 

But i think that asus has a feature to flash the bios without a cpu, called a usb bios flash or something like that.

[themctipers]

Just now, Some Random Member said:

He needs a bios update for that mobo to support tha cpu.

if the CPU isn't supported then it wouldn't even POST

 

[YungYottis]

3 minutes ago, Some Random Member said:

He needs a bios update for that mobo to support that cpu.

 

But i think that asus has a feature to flash the bios without a cpu, called a usb bios flash or something like that.

I have done the bios update 

[Guest]

6 minutes ago, YungYottis said:

I have done the bios update 

Then get a new usb stick and reinstall windows installer on it , and try again.

[paddy-stone]

Full system specs?

 

Also agree that it may be the USB installer, so try re-doing that... or check if the installer works in another PC/laptop.

[YungYottis]

30 minutes ago, paddy-stone said:

Full system specs?

 

Also agree that it may be the USB installer, so try re-doing that... or check if the installer works in another PC/laptop.

: phanteks eclipse p400 tempered glass

ryzen 5 2600

8gb gskill aegis 3000mhz

western digital 1tb

corsair cx550m

asus rog strix b350-f

gt 430 for now until I get a gtx 1060 or 1070:P

[paddy-stone]

43 minutes ago, YungYottis said:

: phanteks eclipse p400 tempered glass

ryzen 5 2600

8gb gskill aegis 3000mhz

western digital 1tb

corsair cx550m

asus rog strix b350-f

gt 430 for now until I get a gtx 1060 or 1070:P

Did you try the things I suggested?

[YungYottis]

42 minutes ago, paddy-stone said:

Did you try the things I suggested?

In about an hour I will give my usb as well a second one to create a bootable Windows usb beacuse I don’t have a second pc to do it and I will retry when he has it done 

[Santo22]

For windows you dont' need to use Rufus. Just use the media creation tool. I would bet money if you just do it this way it will install windows with no issues. 

[YungYottis]

3 hours ago, Santo22 said:

For windows you dont' need to use Rufus. Just use the media creation tool. I would bet money if you just do it this way it will install windows with no issues. 

I tried with the media creation tool but it pops up an exact same error again and again 

[Santo22]

Ok, just to make sure that everything is being done correctly:

 

You used another computer and created a bootable USB with Windows Media Creation tool. Then plug the USB into the motherboard of the new build. When you turn on the computer it "should" boot and load right into the windows installation. What I would also do and is just common practice for me, is make sure that ONLY the drive you are installing windows on is plugged into the motherboard. So if you are using an M.2 or SSD make sure that is the only drive connected at the time of installation. Also make sure your boot options in bios are not disabled. In your pic in first post boot #2 is disabled. You want to make sure what ever is your main OS drive is showing up in the bios. Once you load into windows installation it should show that drive and allow you to format it partition it for the new installation. 

 

if all that fails, re-download a fresh media creation tool from microsoft