Jump to content

Random temp spikes

im getting random cpu temp spikes in my cam software. itll be sitting at 39-42 degrees C then spike to 80+ degrees C. anyone know what could be causing this?

let me know if you need any other info. Thank you!

Untitled1.png.421d484522c73fd8fe73871b6984b0c0.png

Link to comment
Share on other sites

Link to post
Share on other sites

It's kind of what the 7700k does in my experience. It runs hot and has these weird spikes. Mine does it as well.

Crystal: CPU: i7 7700K | Motherboard: Asus ROG Strix Z270F | RAM: GSkill 16 GB@3200MHz | GPU: Nvidia GTX 1080 Ti FE | Case: Corsair Crystal 570X (black) | PSU: EVGA Supernova G2 1000W | Monitor: Asus VG248QE 24"

Laptop: Dell XPS 13 9370 | CPU: i5 10510U | RAM: 16 GB

Server: CPU: i5 4690k | RAM: 16 GB | Case: Corsair Graphite 760T White | Storage: 19 TB

Link to comment
Share on other sites

Link to post
Share on other sites

Could be something like a malware that's coming up and using cpu resource every once in a while.. i had something like this before
the other thing that could cause this is defective liquid cooling or just old AIO that doesn't have enough liquid inside or with other words the liquid has evaporated thus leaving air inside the system 
my 4 year old AIO had maybe half of the liquid left inside and would run like 45 degrees idle and every once in a while would rice up to 60 but that takes like 10-15 minutes to rise the temperature. 
Also look at your thermal compound if u have too little maybe it will be good for like idling and maybe not even noticeable while idling but when u put a stress on the cpu it will rice the temperature fast because not having enough thermal paste will restrict thermal conductivity. 

Link to comment
Share on other sites

Link to post
Share on other sites

25 minutes ago, HristoBB said:

the other thing that could cause this is defective liquid cooling or just old AIO that doesn't have enough liquid inside or with other words the liquid has evaporated thus leaving air inside the system 

I'm about to order a new cpu cooler to try that. should i use the stock thermal compound on the cooler or buy third party compound?

 

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, ParZival1994 said:

I'm about to order a new cpu cooler to try that. should i use the stock thermal compound on the cooler or buy third party compound?

 

If you don't mind voiding your warranty, delidding your cpu and replacing the TIM under the IHS with liquid metal will resolve this issue. Its just background proccesses putting load on the CPU and the poor TIM being unable to dissipate it to the IHS fast enough. My 7700K also used to do this and it was super annoying since it would cause the fans to go beserk if I didn't have sufficient hysteresis. 

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, For Science! said:

If you don't mind voiding your warranty, delidding your cpu and replacing the TIM under the IHS with liquid metal will resolve this issue.

im pretty new to building my own pc. delidding is a bit out of my depth for now. maybe in the future ill try this. Thank you.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, ParZival1994 said:

im pretty new to building my own pc. delidding is a bit out of my depth for now. maybe in the future ill try this. Thank you.

Delidding Sky-Kaby-Coffee Lake CPUs are super easy if you have a tool like the delid-die-mate. People drop their load temps by about 10~20 degrees using liquid metal (e.g. thermal grizzly conductonaut). The liquid metal application is a bit daunting at first but also not a big deal.

 

Some photos from the time I delidded my 8700K (practically the same as the 7700K). You can just see how much thermal paste is caked onto the die, nicely acting as a blanket for the temps.

 

20171109_162410.thumb.jpg.6a5732328207dd5e439d4943cbc4b24a.jpg

 

Hello thermal goop.

20171109_163131.thumb.jpg.b8d468906afbfc375d96d0377a364c63.jpg

 

cleaned the silicon glue off by scraping and the thermal paste with isopropanol.

20171109_165620.thumb.jpg.6207b823928f5dab735f370a67a7c42c.jpg

 

Applied a drop of ThermalGrizzly Conductonaut and spread it with included q-tip.

20171109_165909.thumb.jpg.eeda119bc21b78b45aea471644a80465.jpg

 

Did the same for the IHS, slight more generously since cannot get the exact mount location by eye. Made a right mess of applying a thin line of siliccon glue, but just enough to hold it down is fine.20171109_170554.thumb.jpg.aef7ca8c5cd999d992aba8b26fd42d0b.jpg

 

relidding. 20 minutes.

20171109_171141.thumb.jpg.0d5c069faec00938b0189162f4c67fad.jpg

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, For Science! said:

Delidding Sky-Kaby-Coffee Lake CPUs are super easy if you have a tool like the delid-die-mate.

 

Some photos from the time I delidded my 8700K (practically the same as the 7700K). You can just see how much thermal paste is caked onto the die, nicely acting as a blanket for the temps.

 

Yo, that's pretty cool. ill look into these, thank you for the info. this is a huge help.

Link to comment
Share on other sites

Link to post
Share on other sites

Seems like regular cpu spikes to me.

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×