cooling Reusing CM ML PRO 240 PUMP AND BLOCK
5 minutes ago, KampfkuchenKing said:I get why I shouldnt use the radiator, it is maybe of aluminum, mixed metals on so forth. But why should I not use the pump/block? If the pump is at the highest point of the loop, the strength shouldnt be a problem right? And does the exposure at mixed metals while being used in an aio compremise the cooper cpu block, eventho it is cleaned with distilled water and afterwards used with a pure copper radiator?
Position of the pump is irrelevant since if it is in a high point, it will have to push the liquid back into itself at a later point. If you think about it logically if its in a low point, it will push hard to go up, but then it will be easy on the way back, and vice versa, no difference. These CPU block pumps are not designed to handle more than a block and a rad so I would'nt personally.
AS for compromise vs corrosion, in theory it should be fine if cleaned well. But given the absence of fittings I would also be concenred about getting a leak-free system.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now