Jump to content

Having PC Issues

Vraxxiss
By Vraxxiss
in Troubleshooting
 Share
Posted

So today I received my video card and RAM from UPS. So I installed both pieces and than proceeded to power on my pc. Everything powered on cpu, gpu, psu, and case fans were spinning, but my tv stayed at a black screen. I tried updating my BIOS using the USB Flashback feature on my MoBo didn't help. I don't have a MoBo speaker so I can't exactly pinpoint the issue, my gfx card is connected to my tv through a hdmi cable. I just need some help on maybe finding the problem. My specs are


MoBo- ASUS M5a97 R2.0


CPU- FX 6300


RAM- G.Skill Ripjaws DDR3 1600 8gb


1TB HDD 


Optical Drive


GFX Card- EVGA GTX 650 ti BOOST SC 1GB


PSU- Corsair CX430


Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/
Share on other sites
Link to post
Share on other sites
Posted

Reset your CMOS?

Hope I could help!

Specs: CPU: AMD FX-8320 @4.0ghz GPU: ASUS DCUII GTX 770 PSU: EVGA Supernova 750g CASE: Fractal Define R4 RAM: 8 Gigabytes ADATA 1333 Mhz MOBO: GIGABYTE GA-990FXA-UD3

 

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1186729
Share on other sites
Link to post
Share on other sites
Posted

make sure the aux power for the gpu is plugged in. that is something i have seen people over look

Case: Phanteks Evolve X with ITX mount  cpu: Ryzen 3900X 4.35ghz all cores Motherboard: MSI X570 Unify gpu: EVGA 1070 SC  psu: Phanteks revolt x 1200W Memory: 64GB Kingston Hyper X oc'd to 3600mhz ssd: Sabrent Rocket 4.0 1TB ITX System CPU: 4670k  Motherboard: some cheap asus h87 Ram: 16gb corsair vengeance 1600mhz

                                                                                                                                                                                                                                                          

 

 

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1186763
Share on other sites
Link to post
Share on other sites
Posted

is 430W enough for this Rig? I know that they don't display anything if there is not enough power...

My Rig:

OS: MSX CPU:Intel i5 4690K RAM: 16GB Averix Core Series  GPU: XFX R9 280X SSD:128GB Crucial M4 Motherboard:Gigabyte GA-Z97N Wifi Powersupply: Corsair HX750 CPU Cooler: Corsair H60i Case: Corsair 250D Monitors: Asus VE278 and Asus VW202 Keyboard: Steel Series 6G V2 Mouse: CM Sentinel Advanced Audio: Objective 2 ODAC Headphones: Senheiser HD595

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1187444
Share on other sites
Link to post
Share on other sites
Posted

Can you connect to a display without your GFX card ?

No onboard video

TV9MAtPyxk4mJdm9_500.jpg

MOBO: Gigabyte G1.Sniper M3 | CPU: Intel i7-3770K @ 4.5GHz | GPU: 2x Gigabyte GeForce GTX770 2GB WF3 OC Edition | RAM: Kingston HyperX Blue DDR3-1600 XMP 16GB (4x4GB) | SSD: Intel 530 Series 180GB SATAIII | HDD: WD Caviar Blue 1.0TB SATA III & WD AV-GP 3.0TB SATA II | PSU: Corsair AX 760 | Case: Chieftec DX-02B | CPU cooler:  Corsair H100i with 4 Noctua NF-F12's in Push-Pull | Fans: 3x Noctua NF-S12A Front and Rear-intake, 1x Noctua NF-A14 Bottom-intake, 1x CoolerMaster MegaFlow 200 Side Panel-intake, 1xNoctua NF-F12 Top-exhaust | OS: Windows 7 Ultimate 64-bit | Keyboard: Logitech G510 | Mouse: Gigabyte Aivia Krypton

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1187659
Share on other sites
Link to post
Share on other sites
Posted

Have you tried pluging your monitor/TV into GFX's DVI port or changing the PCI/PEG settings in BIOS.

MOBO: Gigabyte G1.Sniper M3 | CPU: Intel i7-3770K @ 4.5GHz | GPU: 2x Gigabyte GeForce GTX770 2GB WF3 OC Edition | RAM: Kingston HyperX Blue DDR3-1600 XMP 16GB (4x4GB) | SSD: Intel 530 Series 180GB SATAIII | HDD: WD Caviar Blue 1.0TB SATA III & WD AV-GP 3.0TB SATA II | PSU: Corsair AX 760 | Case: Chieftec DX-02B | CPU cooler:  Corsair H100i with 4 Noctua NF-F12's in Push-Pull | Fans: 3x Noctua NF-S12A Front and Rear-intake, 1x Noctua NF-A14 Bottom-intake, 1x CoolerMaster MegaFlow 200 Side Panel-intake, 1xNoctua NF-F12 Top-exhaust | OS: Windows 7 Ultimate 64-bit | Keyboard: Logitech G510 | Mouse: Gigabyte Aivia Krypton

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1187667
Share on other sites
Link to post
Share on other sites
Posted
  • Author

So my MoBo speaker arrived earlier today and I plugged it right into the correct spot on the MoBo. I turned on my pc but no beeps at all the mobo led is on as well as all the fans on the case and components. I tried with each stick of ram and with no ram, the gpu was out for both tests and still no beeps could it be my mobo thats doa or defective?

Link to comment
https://linustechtips.com/topic/87502-having-pc-issues/#findComment-1215032
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×