Water cooling set up?

[SlicedAce]

I was wondering if you guys input in my custom water cooling loop?

 

https://pcpartpicker.com/list/BQdCNN

[Damascus]

Only one dual core rad?

[Damascus]

Also, I'd get this case instead, you can get an EK Xres tube/pump combo

https://www.nzxt.com/products/h400i-matte-white

[Cyracus]

Why $32 when https://www.ekwb.com/shop/ek-af-ball-valve-10mm-g1-4-black-nickel#ow_alert_box

[SlicedAce]

Little to expensive for me.

1 minute ago, Damascus said:

Also, I'd get this case instead

https://www.nzxt.com/products/h400i-matte-white

 

[SlicedAce]

2 minutes ago, Cyracus said:

Why $32 when https://www.ekwb.com/shop/ek-af-ball-valve-10mm-g1-4-black-nickel#ow_alert_box

 

whoops my mistake

[seon123]

Why would you ever water cool a 1500X?

[Damascus]

19 minutes ago, seon123 said:

Why would you ever water cool a 1500X?

Yeah, A nice case is too much but the loops costs soo much more

[W-L]

56 minutes ago, SlicedAce said:

I was wondering if you guys input in my custom water cooling loop?

 

https://pcpartpicker.com/list/BQdCNN

As said the 1500X doesn't throw out a lot of heat so a custom loop isn't exactly worth the extra work when an AIO can easily handle it. If you do want to install a loop that would work but you require a proper biocide or compatible fluid all you have is dye, I would recommend to get a premix such as Mayhems X1 or EKWB Cryofuel. 

[GeorgeDouj88]

4 hours ago, SlicedAce said:

I was wondering if you guys input in my custom water cooling loop?

 

https://pcpartpicker.com/list/BQdCNN

Two CPU bLoCKs?!?!

[For Science!]

5 hours ago, SlicedAce said:

I was wondering if you guys input in my custom water cooling loop?

 

https://pcpartpicker.com/list/BQdCNN

Had a look through here are some comments

 

You only have 6 fittings but I counted 3 components (rad, res, CPU block, pump) meaning you need at least 2 more fittings

 

I would recommend a D5 pump or at least a DDC over the spc pump

 

You need at least 2 dual rotary male to male fittings to connect the t splitter to your loop and the ball valve to the splitter. you will also need a stop plug for the ball valve.

 

Get a premix or concentrate. since it looks like you're after blue, consider something like the EK CryoFuel navy blue.